1969NovaSS

well i finally cranked my engine and i did it without the plugs in and some water came out off the #7 cylinder and im praying its just a leaky intake gasket but im not SURE so where should i start and whats the most common cause of water gettin into a cylinder? also i read that you should use a good amount of gasket maker on the intake just for this reason and i used some but i didnt know i should put any more than wat seemed reasonable so if someone can help me out THANK YOU

exoticars07

well... if you think you have an intake problem. check your oil make sure there is no water in there and then go ahead and do a coolant test. and if everything checks good then you could have just got water in the carb and ur number seven intake was open.