texasboy05

when i start the truck, it takes a few seconds for the oil press. guage to build like it does after an oil change and while driving the needle is all over the place. anyone got any ideas?

rhandwor

I would remove the sending unit and install a pressure gauge. Sometimes the sending unit goes bad. It could possibly be a bad ground. Unless you veryify it with a gauge you are taking a chance buying parts.

69Charger

THere is a service bulletin on those clusters doing just that.. it has to do with a ground strap in back of the cluster.. I'll see if I can dig it up

__________________
Mark Mcknight
Elmvale Truck & 4x4
(705)-715-7867
Elmvale, Ontario

87 Mustang GT, 5.0L 5 spd, MSD ignition, BBK tubes, flowmasters, tri-ax shifter, 4.10 gears
69 Charger SE, stroked & poked 383,727 over 550rwhp
86 Chevy 2500 4x4 Plow truck, 350/TH400, 8ft fisher plow