s10blazerman4x4

A buddy of mine sent me this on AIM.
http://www.turbobuick.com/forums/sho...d.php?t=187636
then from there goto http://www.safestrustremover.com/#
He is using it to strip his buick grand national and tells me its insane how well it works

__________________
1991 Chevy S-10 Blazer 5.7 V8 RIP
1999 Chevy Blazer 2dr 4.3--> If GM engineered something to fail on this beast it has or will. Repairs include w/in first 30 days of owning it: P1870, left front wheel bearing, gas cap, rad cap, idler tensioner, seat handles, and the list goes on.

http://www.automotiveforums.com/vbul...d.php?t=890449

Chime in ^ with any suggestions.

rental blazer

what a fraud take a closer look at the pix the rusty one has the spring come out the bottom and the good one has the spring come out the top and also the rusty one had only 1 unpainted zerk like fitting while the clean one had 2....you may notice more but it yells out fraud to me....

OverBoardProject

I use something like this

and it really does a nice job

s10blazerman4x4

See i dont know cuz he is not the kinda person to tell me about something unless he has tried it and it turned out ok for him. So im waiting for him to shoot me some pics in the next few days to see what it looks like. So i shall see and what not. Lol no notification again, that needs to get fixed.

__________________
1991 Chevy S-10 Blazer 5.7 V8 RIP
1999 Chevy Blazer 2dr 4.3--> If GM engineered something to fail on this beast it has or will. Repairs include w/in first 30 days of owning it: P1870, left front wheel bearing, gas cap, rad cap, idler tensioner, seat handles, and the list goes on.

http://www.automotiveforums.com/vbul...d.php?t=890449

Chime in ^ with any suggestions.

OverBoardProject

I don't knw what's wrong with the notification either, I have the same problem

dmbrisket 51

for the price of one gallon of the potential fraud product, we bought 5 bags of sand, and know it works... also, in the testimonies, most people mention they have to do some wire wheeling, and in the lever picture the 'clean' leaver is dry and being held like it was just picked out of the bucket

mike1224

i have to agree with "rentalblazer" on this. it looks too different to be the same thing, just cleaned up.
I also call BS because of
Join Date: May 2006
Location: NJ
Posts: 1
(his first post was to tell us how to remove rust?)

looking at several of the pictures on the actual site, many of the parts look like they have different objects ATTATCHED in the before and after pics! like this:::
http://home.comcast.net/~mike.sinclair/heatervalve-a.jpg
http://home.comcast.net/~mike.sinclair/heatervalve-b.jpg

maybe its just me, but i really don't think they're legit.


how did they recieve this: (below)
Safestrustremover.com Has Been Awarded

Great Stuff Award Oct. 2004

__________________

muzzy1maniac

According to those pics it's a dent remover too!!!!

__________________
2004 Explorer XLT
4.0L 4x4

1998 Ranger Supercab
4x2 3.0L


Anyone who said There Is No Such Thing As A Stupid Question never worked in a grocery store!

Come visit me on www.faceforums.com

wolfox

If you're not careful, it's also a part remover - comparing photos A and B side-by-side... there are whole brackets missing in each case. But you know, I would pay money for a pour-on liquid dent remover. Oh, oh, and I will take a case of metal mite repellant too while I am down here...

D-oh, and before I forget, I need Chevrolet OEM door hinge glue before I leave too...

mike1224

Shawn, your friend is dumb and sucks at life.

__________________

OverBoardProject

Can't call him dumb just because he waited in line to buy that bridge.

There are just too many scamers out there, and the best way to see through them is to ask people on a forum such as this one.

DINO55

I remember the DOOR HINGE GLUE POST.....

__________________
1998 BLAZER LS Vin-W 4Dr 2wd
2004 Cavalier LS 4Dr 2.2 Ecotec

"Good Part's ain't Cheap--Cheap Parts ain't Good"

wolfox

Man, I just love our Search feature here in our forum. Here's a link to an absolutely shameful conversation that Dino remembers fondly:

http://www.automotiveforums.com/vbul...ight=door+Glue

joeuser742

I don't know, look how wet that tailpipe got and I don't see it shine.

__________________
1998 Blazer 4WD 4.3L 118,000miles 4dr
Repairs
--rear main seal, u/l ball joints, pitman/idler arms, i/o tie rod ends, control arm bushings, motor/trans mounts, oil relocation lines, door pin bushings, water pump, ring/pinion.
--Bad ABS ground, loose connection blower motor, repaired pulse board.
Mods/upgrades
-Throttle plate mod.

1999 Ford Windstar SE 3.8L 160,000miles
Repairs
--P171/P174 procedure, loaded control arms, tie rod ends, shocks, struts, springs.

dmbrisket 51

seriously guys, gm DOES accualy glue some hinges on, ive yet to find where they are using bubble gum, but they realy do use glue