OK so i put the DHP V1 in my car like u guys suggested and i am still bogging out at the line again i have a downpipe back exhaust all 2 1/2 inch i have a intake and a 3.325 pulley and im still bogging out any suggestions?
It would be helpful if you could state the conditions for the bogging. Is it at launch or while car is is motion? You may be in a situation where there is insufficient fuel getting to the injectors when high boost is in especially with the smaller SC pulley. The GTP fuel injectors are rated at 33#. Have you run a fuel pressure check? You may have to run the fuel pressure tester where you can observe it when the bogging occurs.
