|
Re: Lake Pontiac....in the passanger floor board of my car...
The HVAC drain tube is located on passenger side of the firewall and is a black rubber 90 degree boot.
It is a pain to get at on a 3.8L SC motor, but on the 3100 it's easy to get at. I had to remove the strut brace on my parent's Regal to then contort my arm and pull the plug. On my GP I just leaned over the fender and pulled the boot off.
If you have a two piece plastic intake cowl, then you're A) Lucky and B) Most likely have a filter in the blower intake. Either way, you should take off the intake cowl and look at the rubber seal That runs along the sheetmetal lip just below the windshield and just above the air intake for the HVAC blower. If that seals is loose, water will seep past it, drop straight down into the housing and get water everywhere.
|