|
Re: Help needed quickly
You sure they didn't put a new intake manifold gasket set on? Either way the upper intake gasket is an 8 bolt plastic housing over the injectors - simple to take off and the fuel pressure regulator is on the injector spider (6 injecors come off it one to each cylinder). The fuel pump line is pressurized and the return line flows gas back to the tank. Maybe you have a #1 injector bad,
O-rings, cracked plastic pipe, injector head, etc. Sounds like mech wants to change out the entire injection - easy but not usually required. Finding that going to the Chevy dealer (yes I know) is often a better option now as they see these alllll the time and their rates are often the same or close to others. Oh, check the #1 plug wire with an ohm meter - they may have damaged it during the repair also.
|