Ultrashock

im planning on replacing my passenger window in my blazer.

Whats the easiest way to remove those annoying rivets?

__________________
92 S10 Blazer Sport
4.3l Vortec V6 (W)
275,000 miles
Jasper engine, Rebuilt tranny + rearend

04 Pontiac Grand Prix GT
43,000 miles

mike1224

I'd imagine drilling them out, then use sheet metal screws to finish up the job.

__________________

old_master

If you're referring to the regulator: These rivets are aluminum and drill out very easily. Use a 1/4" drill in the center of each rivet. Once the head of the rivet is off, use a 1/8" punch to push the stem through. Use 1/4"x20x1/2" bolts, nuts & lock washers. If you're referring to the glass itself, use 1/4"x20 bolts & 1/4"x20 nylock nuts.