Can anyone please help me? I have some stock 2000 Z06 rims and they rub on the axle snuffer when i install them on my 97 Z28. The rear rims are 18x10.5 and i have always heard this is a easy swap over for these cars. I used a spacer and that didnt help i have the style of lug nuts that sink into the spacer for a better bite on the threads of the stud....Thanks a lot to anyone who can help.....
Can anyone please help me? I have some stock 2000 Z06 rims and they rub on the axle snuffer when i install them on my 97 Z28. The rear rims are 18x10.5 and i have always heard this is a easy swap over for these cars. I used a spacer and that didnt help i have the style of lug nuts that sink into the spacer for a better bite on the threads of the stud....Thanks a lot to anyone who can help.....
18'sx10.5 will not fit in the front no matter how hard u try. to tfit them on the back u need low profile tires, and pressure needs to be applied to the rear axle when putting them on for the rims to fit.
yes, I meant the 18's in the rear, they touch the snubber when i put them on, the 17's in the front seem to work fine. There is no offset on these rims they are not replica's. I cut the snubber of my 95 camaro and dont want to mess up the suspension on this one.
Thanks alot all, i got them on with no problems. The rubbing was only when i had the rear end off the ground, when i dropped the jack everything fell into place perfectly. I will try to post pics later!
Z06 rims wont fit my 97 Z28....HELP!!!
