|
Re: Trunk release won't work
Does the unit at the trunk make any noise when the remote is pushed? if not what you can do is try using a test light, Unplug the wiring at the trunk and use the test light probe in the power side of the wiring, there may be only one wire which would be the power side because the unit would then be grounding itself. make sure you have a good groung on the test light and then push the remote button or door button if the test light lights up then the trunk unit is bad. If it does not light up then you have a problem further up the wiring. It could be a simple ground out on the power wire (should have poped the fuse, but I have seen shorts that don't pop the fuse, they just create a problem), or you have problem with the remote unit. It sounds to me like a power problem (if not the trunk unit) because if the remote was bad the door button should still work.
I hope this helps.
|