keedar

I lost one of my keyless remotes, and Just found it but it's not working does anyone know how to program it.
It's for a 1998 Jetta k2
Thanks allot

bruceb

if you don't want to go to the dealer (who will try to charge you 1/2 to 1 hour labor ~$50) try www.keylessride.com, or www.remotesunlimited.com.

keedar

Yeah Those website, keylessride.com does not load and the other website does not tell me how to program my remote....Can someone point me in the right direction ...
I need instructions on how to program a keyless entry remote for a 1998 Jetta k2...
thanks

ralph888

www.keylessride.com (doesn't load with the comma after .com).

HayaiCivic

Use the manual, or go to the dealer. Dont ask around here because most of us had our dealers take care of that for us.

__________________

carboy123

----------------------------------------------------------------
How to program a 1998 Volkswagon Jetta Wireless Remote (Clarion)
----------------------------------------------------------------
Note: This requires two car keys and a wireless remote.

1. Put the 1st key in the car's ignition. Turn the key so that the electrical system comes up, but don't start the engine.

2. Get out of the car and close the car door.

3. Put the 2nd key in the drivers side door and lock the door.

4. Turn the key in the drivers side door to the left and hold it there until the car beeps 3 times. (this enables programming mode)

5. On the wireless remote, push the Lock, Unlock and Trunk buttons.

6. Once again, turn the key in the drivers side door to the left and hold it there until the car beeps 3 times. (this disables programming mode)

The remote should now work with your car.
Enjoy,
Pat

eatsameatsa

im having the same problem. but i want to purchase a used remote. will any 98 volkswagen remote work with my jetta. If not what is the compatability with these remotes.

i have a 98 jetta glx