Need help locating the low pressure switch. I found one next to the accumulator but it has three wires. Is this the correct one. If so which ones do I jumper to start the compressor so it will take a charge??
yes there is a A.C. fuse should be in your fuse panel,,fastest way to check and make sure compressor is good is jump a hot right into the plug on the compressor.
You should put the selector on Defrost or max and jumper the LP switch. The compressor should click on. If not it could be the relay, (I just changed mine out). You can pull the relay and put in a jumper to simulate a closed contact. If the compressor doesn't come on, it's probably bad.