orion_X_100

hey, i got a 2.8 v6 and looking for a nice, sporty, exhaust. . . i got the stock on there now so i just want something not toooo expensive but still good quality. and if u know of any sound clips of v6 camaros let me know

Thanks,
~Mike

Savage Messiah

2.8 eh... see if magnaflow or dynomax makes something for your car (magnaflow doesnt but you can bolt up the 2.5" system.. I wouldnt reccommend 3 inch on a 2.8)

__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later.

194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies

179.75 RWHP, 204.52 RWTQ

ON ITS WAY: MORE

R.I.P. Andy

87 Benz 190e - DD

01 EX250 - still gotta get my license for this thing

demon9766

well i put a flowmaster delta flow 40 on my wife's 3.1 and it sounds kickass.

__________________
This is what 500 plus hp looks like.CNC ported AFRHEADS WITH 2.02 INT 1.60EXH,210 intake runners 74cc chambers, 750 speed demon carb,weiand intake,comp cams 292 with .501/.501 lift ,4340 forged crank,eagle H-beam rods duroshield bearings,KB forged 10 1/2:1 pistons,headers with 1 3/4 primaries ,MSD 6AL,comp cams pro mag1.6 rockers,holley blue pro-series pumps,MSD billet distributor.All stuffed into a 355.[img][/img]

Savage Messiah

for what, 2000-3000 rpms?

__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later.

194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies

179.75 RWHP, 204.52 RWTQ

ON ITS WAY: MORE

R.I.P. Andy

87 Benz 190e - DD

01 EX250 - still gotta get my license for this thing