79403ta

ok i have 2 problems with my 97 k1500 (5.7) first off i ordered the wrong muffler (single in and dual out, instead of dual in dual out) from a guy on ebay its a 3" single inlet and 2.5 dual exit ( i forgot they changed the syle from single inlet to dual inlet in 96) can i buy one of these "Y" collectors ($40.00) and turn my dual pipes(inlet side) into single so it will work on my Flowmaster muffler ?? what size are the stock inlet pipes on the stock muffler 2.5" ?? ......second question sometimes maybe 4 times a month when my truck is cold and i put it into reverse and hold the brake it feels like something is "tugging" on the back of my truck but my truck doesnt move because i am holding the brake....i was wondering if this could be transmission or maybe rear end problem ?? thanks Jason

99redsilverado

we could care less...check the c/k forum

__________________

'99 Silverado 4 x 4
bunch of goodies

79403ta

I thought this was supposed to be Truck forum i have already posted in c/k and by the way my truck is a SILVERADO...

Silverado Brethern

yeh mine says silverado on it to, but the model is actually K-1500. So just re-post in the c/k forum.

BTW 99redsilverado, how about not being a dick cuz the trucks are pretty much the same anyway.

__________________
"Never under estimate the power of stupid people in large groups."

1997 K-1500 Silverado Vortec 350...125,610 and wounded
HD chassis package
Custom TRUE DUAL exhaust with cut-outs and Flowmaster 40 series mufflers
Poweraid Throttle Body Spacer
Custom Ram-air Intake with K&N FIPK GEN II
TFES Performance 3" Suspension Lift
Dual Air-Horn Kit with Compressor
Bed-Mounted 48" Hi-Lift Jack
Cobra Laser Radar Detector
285/75/R16 Cooper Discoverer STT's

1/4 Mile 10/15/05: 16.43 @ 91mph