|
OH what fun, been there done this. Since i saw in your profile you have a 92, this is what you have to do. You have to climb under the front of the car and reach up to the turn signal encasement. turn the socket and pull it out. Now this is what i did when this happened in my friends car. I took some scotch tapes wrapped it around my finger and stuck it in the encasement and got the bulb attached to the tape, then carefully removed my finger. when doing this you will need the car to be over a driveway incline or possibly jacked up so you have enough room to work, you can use any type of tape as long as it's sticky enough, and make sure the bulb is good before putting in the socket to prevent having to go through this all over again.... good luck and just take you time and have patience.
__________________

|