LT1MAN

well i was going down the highway, the same ol highway, the other night when i pulled up beside an LS1 trans am, well i could tell he wanted to race and we were approaching the last light before the highway intersected with interstate 485, well we were approaching the light (it was a camera light), well it turned yellow on us and i slowed down to race his ass and he stomped it and flew through the light. (dumbass). well i watched him get on the interstate up ahead of me so when the light turned green again i speed a lot to catch up with him on the interstate. caught up to him, he jumped me the first time by about 3 carlengths, i was like oh your going to cheat are you so i was going to just let him go but i said fuck it and started trying to catch him, well i couldn't believe it but we got up to about 125 and i flew, i mean FLEW, past his ass. we slowed down and raced from beside each other and i just pulled all over him. raced about 5 times and then we got off at the same exit and raced from a stoplight. burnt his ass off the line, had him by 2-3 carlengths by the top of 2nd gear. then turned around and went home.

LS1's usually give me a hard time about 120 but every since i got the jet chip and descreened the MAF and got all that other shit i feel a SERIOUS increase in top end power which is the weakness for LT1's.

it was fun, cant wait til the next race...

Link85x

Nice kill, LT1 MAN!!! Where did you get teh Jet chip from? Do they have them for 3rd gen tpi maros?

__________________
87 IROC - R.I.P, and she will never be forgotten
90 RS - The beginning of a new era... I hope.

drvngstorm05

damn man, u are just rackin this stuff up. nice kills, honestly, not to be mean or anything, but with those massive rims i kinda expected ur performance to be seriously hurt... guess not. keep gettin kills dude

__________________

'92 RS lt1/t56, lt4 hot cam, 30lb injectors, 54mm throttle body, full exhaust, 4.11 posi, 4 coil ignition, alluminum driveshaft, adj rear suspension, low. springs, electric water pump, custom tune.

Link85x

The LT1 never fails to amaze anyone. If i had 10g's right now, i would dump and LT1/T56 combo in my car in a heart beat. All hail the al'mighty LT1!!!

__________________
87 IROC - R.I.P, and she will never be forgotten
90 RS - The beginning of a new era... I hope.

Earlsfat

Nice. I'd like to do some racing liek that, but uh... my maro's on the sidelines for a while. I honestly don't think the old KIA Sedona is up to the challenge. lol

__________________
Cheesesteak..... It does a body good.

- - - - - - - - - - - - - - - - - - - - - -

"All you want to talk about is money, let's talk about love, and sex... forget love, let's just talk about sex. "

94Ztwenny8916

LT1man i wondering how much and where u got the jet chip from and if u noticed a good amount of hp increase... cuz thats the next mod on my list... and also by descreening the MAF what does that do for u, and does it hurt the motor in any way or tweak the computer system?
Nice kill by the way

LT1MAN

i got my jet chip locally from a speed shop for around $220. they retail for 300 plus.

drvngstorm05, the rims arent actually THAT massive. the diameter of the chrome wheel and tire is the exact same as that of the stock wheel and tire which is 26.5" i believe. but the chrome wheel and tire weighed 3 lbs more than the stock wheel and tire, well i didn't have the stock wheels i take that back i actually had firebird wheels, but they are probably the same anyway.

Link85x, theres a guy in my neighborhood with a 3rd gen IROC Z28 with an LT1/t56 in it with vortec heads and a ton of other stuff that has smoked me a long time ago. that was when i didn't have headers, chip, ta, lcas, stb, etc.

MMonnier2302

man your smoking everyone, i want to see a dyno slip, that would make my day.

__________________
i love dem bats!!

1995 Camaro Z-28
2000 Dodge Ram 4x4 Sport 5.9

88camaroproject

umm by descreening the maf sensor do you jus mean pulling out the little metal screen in font of the maf sensor? cause my 2.8's intake has a little screen in front of the sensor.is it easy, does i hurt anything?

__________________

87 firebird formula ws6
(currently has a old 78 305 with the following upgrades,
including lots of miles and stock heads and internals....oops)
crane cam cam specs
performance valve springs and retainers, flowtech headers, 255 lph fuel pump,
holley 600cfm carb, weiand single plane manifold, a healty diet.
14.90 1/4 mile....just wait for the 406 to be finished
MY VIDEOS
MY PICTURES
-Tom

Rally Sport

Lt1 man, screw you, you really make me want my Camaro back in action more than I already do. Sadly though its on the sidelines with Earlsfat's Camaro.

__________________

Savage Messiah

Change "Kia sedona" to "Hyundai elantra" and you've got my sentiments exactly

__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later.

194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies

179.75 RWHP, 204.52 RWTQ

ON ITS WAY: MORE

R.I.P. Andy

87 Benz 190e - DD

01 EX250 - still gotta get my license for this thing

LT1MAN

yes thats exactly what i mean. my brother took his out of his 98 and it was fine for about a year and a half so i said fug it the other night bc i needed a couple extra hp, you just stick a screwdriver down in there and pry up one edge of it and pop it out. JUST BE EXTREMELY EXTREMELY CAREFUL NOT TO TOUCH THE ACTUAL SENSOR, VERY COSTLY IF YOU SCREW THAT UP, it helps if you can put the housing in a vice or something.

i wish i could dyno my car, its pretty expensive tho. i'd rather spend that money on performance. but i do want to, i also want to by a super duper bad ass alarm also, the one i have now is like 1994 technology (not factory).

correct me if im wrong, and ill ask him also, a close to stock ls1 lays down 310hp/320tq. well ive smoked plenty of modded ls1's so id guess maybe in the 320hp/330tq. hell that sounds like too much to me, maybe i just dont really know how fast the car really is. maybe i have my numbers mixed up. i just need to dyno the bitch.

Link85x

Damn, you guys gotta hurry up and get your cars back on the field!!! Mine is almost the sameway, it just i can drive it, but not hard. Can't race cuz, i don't wanna put too much stress on the motor, that exhuast is getting real bad. 23 more days til i get my headers!!! My catalytic will be here this friday, gonna get a flowmaster muffler on the 2nd (i'll use this until i get a catback system, whenever thst is)

__________________
87 IROC - R.I.P, and she will never be forgotten
90 RS - The beginning of a new era... I hope.

LT1MAN

you're going to love the headers

drvngstorm05

love them once they're on... prolly not during the process of puting them on...

__________________

'92 RS lt1/t56, lt4 hot cam, 30lb injectors, 54mm throttle body, full exhaust, 4.11 posi, 4 coil ignition, alluminum driveshaft, adj rear suspension, low. springs, electric water pump, custom tune.