04-12-2002, 09:40 AM
|
#1
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
before i install
What hoses do i need? Like the radiator hose and shit like that. I know i'm gonna replace the timing belt and water pump. The wiring seems easy but the hoses is what bothering me. I just need new hoses. If someone can provide me with part number that'll be great. Thanks.
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
04-12-2002, 10:47 AM
|
#2
|
|
AF Enthusiast
Join Date: Dec 2001
Posts: 536
|
upper radiator hose - 95 del sol VTEC
lower radiator hose - 90 crx si or probably 95 del sol VTEC
im pretty sure that that's all of the hoses that i needed.....i would STRONGLY RECOMMEND HOWEVER TO REPLACE EVERY SINGLE RADIATOR HOSE ON THAT ENGINE. i didn't and i have had to replace almost every single hose because they've sprung leaks. almost every hose can be sourced off of a 95 del sol VTEC. (DOHC not SOHC...that's the si.)
__________________
FLINT BLACK 1990 CRX SI
Appearance Mods:
-JDM EF8 CR-X SiR Spoiler
-94/95 Integra GS-R rims
Performance Mods:
-JDM B18C swap
-OBD1 conversion
-Chipped P28 ECU
-Skunk2 Intake Manifold
-DC Sports 4-2-1 Header
-MSD SCI-L ignition
-EXEDY Racing Clutch
Interior Mod
-'95 Integra GS-R Gauge Cluster
Former Motors - RIP:
-JDM B16A #1- Blew up due to over-revving
-JDM B16A #2 - Hydrolocked
Former Cars
 '89 CRX Si - "The Bumblebee"
 '94 Integra GS-R
 '96 Camaro
|
|
|
|
|
04-12-2002, 12:20 PM
|
#3
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
Quote:
Originally posted by Fishcat37
upper radiator hose - 95 del sol VTEC
lower radiator hose - 90 crx si or probably 95 del sol VTEC
im pretty sure that that's all of the hoses that i needed.....i would STRONGLY RECOMMEND HOWEVER TO REPLACE EVERY SINGLE RADIATOR HOSE ON THAT ENGINE. i didn't and i have had to replace almost every single hose because they've sprung leaks. almost every hose can be sourced off of a 95 del sol VTEC. (DOHC not SOHC...that's the si.)
|
Well is that all the 2 hoses that i need? OF course i'm gonna replace them cause i cut them off already. I just went out to buy the water pump, timing belt and distibutor cap. I think i got the wrong dist. cap. I asked for the del sol dohc one and they gave it to me. Well i'm gonna go check it out to see if its rite or not. thanks
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-12-2002, 12:32 PM
|
#4
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
Ok i just found out that the distributor cap doesn't go with my b16. Its totally different. I have to go back to Napa and return it. Does the ' 99 - '00 SI one works? Thanks.
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-12-2002, 12:42 PM
|
#5
|
|
AF Enthusiast
Join Date: Jan 2002
Posts: 363
|
from www.hasport.com
Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.
Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.
Distributor cap 90 Integra
I followed this list closely, the swap goes on this weekend, I'll let you know the results
__________________
I'm a lonely male who'll settle for any phony in a ponytail - MCPB
The b16 is in and running strong
|
|
|
|
|
04-12-2002, 12:48 PM
|
#6
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
Quote:
Originally posted by ricodemus
from www.hasport.com
Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.
Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.
Distributor cap 90 Integra
I followed this list closely, the swap goes on this weekend, I'll let you know the results
|
Oh alrite man thanks alot yo! 
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-12-2002, 01:03 PM
|
#7
|
|
AF Enthusiast
Join Date: Dec 2001
Posts: 1,320
|
Quote:
Originally posted by ricodemus
from www.hasport.com
Upper radiator hose : 92-93 Integra GSR, Acura part number 19501-PR3-000. Trim to fit.
Lower radiator hose 90-91 Integra, Acura p/n # 19502-PR4-A00. Trim to fit.
Distributor cap 90 Integra
I followed this list closely, the swap goes on this weekend, I'll let you know the results
|
This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.
__________________
91 civic 4dr
b16a
14.8@94
|
|
|
|
|
04-12-2002, 01:16 PM
|
#8
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
Quote:
Originally posted by 91zc
This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.
|
So i get 2 lower hoses or what? 
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-12-2002, 01:38 PM
|
#9
|
|
AF Enthusiast
Join Date: Jan 2002
Posts: 363
|
Quote:
Originally posted by 91zc
This list is correct except that I found that the 92-93 GSR radiator hose was too short. So I got an extra lower hose and cut it to fit since it had approx. the same bend to it on the one part as the gsr hose. It worked perfectly.
|
yeah, do you mean another gsr hose? or you sourced from a different car that looked similar? I just read on there that I need the damn teg rear mount bracket. I hope my motor has that shit on it, since it was supposed to come with mounts. damn...
__________________
I'm a lonely male who'll settle for any phony in a ponytail - MCPB
The b16 is in and running strong
|
|
|
|
|
04-12-2002, 04:15 PM
|
#10
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
I wonder if i need that rear integra mount bracket?? I have HCP and it came with 4 mounts so i'm not sure if i need it or not? Do i?
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-12-2002, 05:37 PM
|
#11
|
|
AF Enthusiast
Join Date: Dec 2001
Posts: 698
|
between my site and the hasport site, the swap should be a snap!
|
|
|
|
|
04-12-2002, 05:39 PM
|
#12
|
|
AF Enthusiast
Join Date: Dec 2001
Posts: 698
|
about the mounts...... first off, you cant use stock mounts. Secondly, no matter what kit you use, you still need the rear bracket from a 90-93 teg..... c'mon guys this stuff is cake!
Just gotta look around.....
|
|
|
|
|
04-13-2002, 10:07 AM
|
#13
|
|
AF Enthusiast
Join Date: Jan 2002
Posts: 363
|
hah, shoulda known Phatwippin would say something about the rear mount (after reading the webpage). I was happy to see that I did get the rear mount for the SiR, otherwise I woulda been screwed because the closest teg mount was in Georgia. Of course I got the billet HASport mounts! The old motor is out, starting on the b16! later
__________________
I'm a lonely male who'll settle for any phony in a ponytail - MCPB
The b16 is in and running strong
|
|
|
|
|
04-13-2002, 09:29 PM
|
#14
|
|
AF Fanatic
Join Date: Dec 2001
Location: Chicago, Illinois
Posts: 7,516
|
Quote:
Originally posted by ricodemus
hah, shoulda known Phatwippin would say something about the rear mount (after reading the webpage). I was happy to see that I did get the rear mount for the SiR, otherwise I woulda been screwed because the closest teg mount was in Georgia. Of course I got the billet HASport mounts! The old motor is out, starting on the b16! later
|
you wanna see who can get done first? 
__________________
IncreasinglySimpleLetAloneMagnificient
|
|
|
|
|
04-14-2002, 01:07 PM
|
#15
|
|
AF Enthusiast
Join Date: Jan 2002
Posts: 363
|
well, I'm not really doing it, I'm kinda watching and learning. but we'll see who gets done first....
__________________
I'm a lonely male who'll settle for any phony in a ponytail - MCPB
The b16 is in and running strong
|
|
|
|
|
DriverSide Home |
Service & Repair |
Car Prices |
Parts & Accessories |
Reviews & Advice |
My Garage
I AM the Anti-Rice!
