cornerofdivision

I'm sure most firebird owners have had the gear of their headlight motor become stipped. I was wondering if it would be better to buy a replacement gear, like the metal ones found on ebay. Or to buy a whole new or used motor? I know replacing the gear would be cheaper, has anyone here done it and how tough was it?

FormulaLT1

I changed mine to the bronze one's and its not too bad. I figured it was better to do it right once than having to do it over like 3 times in a couple years. The bronze ebay gears come with step by step instructions and is not that hard even for a novice and it will save you the trouble of having to worry about doing it again down th road. Good Luck

John

__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart.


Mods: Weight reduction (I don't wear underwear)

Mr. Luos

http://www.bfranker.badz28.com/headlightfix/index.htm

I haven't had to replace mine yet. I will get the brass gears when I do though.

__________________
1999 Pontiac Trans Am WS.6 #1747
Stock'ish'

cooltc2004

Any of those work on a 3rd gen?

__________________

99onI95

Like formula I replaced one of my gears with bronze. Also check your rubber stops on the headlights worn stops will cause your light to bounce even after gear replacement.

__________________

oxiderush

the moron i just bought my car from installed a 3 in cowl hood that didn't line it up right, and overlapped the headlight doors. That's probibally why the're burnt out on my car