bluechevytruck

Ever since we had a prodigy brake control installed, our cruise control has not worked.

Any tips on the route I would take to identify the problem?

Thanks.

J-Ri

make sure they didn't adjust the brake switch for the cruise control. The computer may think the brakes are on.

__________________
'04 Cavalier coupe M/T 2.2 Ecotec
Supercharged 14 PSI boost, charge air cooler, 42# injectors
Tuned with HP Tuners

'86 3/4 ton Silverado
350 V8, 4x4, 4" lift, 1 ton axles swapped, converted to 4 wheel disc
35" BFG Mud Terrain T/As
Shortened to 109.5" wheelbase for those tight trails

http://www.boycottpepsico.com/default.aspx

You see "Fresh oil, loose gravel"; I see "Free undercoating"

bluechevytruck

How do I check if they adjusted the brake for the cruise control?

THanks

J-Ri

There should be two switches on the brake pedal. One is for the brake lights, the other is for the computer. Press the brake pedal down while watching the switches. Make sure that both make contact with the pedal, and that they are both full depressed when the brake is off.

__________________
'04 Cavalier coupe M/T 2.2 Ecotec
Supercharged 14 PSI boost, charge air cooler, 42# injectors
Tuned with HP Tuners

'86 3/4 ton Silverado
350 V8, 4x4, 4" lift, 1 ton axles swapped, converted to 4 wheel disc
35" BFG Mud Terrain T/As
Shortened to 109.5" wheelbase for those tight trails

http://www.boycottpepsico.com/default.aspx

You see "Fresh oil, loose gravel"; I see "Free undercoating"

bluechevytruck

We did not find any switches on the brake pedal. The lever to the brake pedal just goes through the wall to the engine area. Any other suggestions?

Thanks