Joesabo

My heat is only blowing out at the highest setting(5) and the blower sounds funny. Yes, I think it has taken a crap. I'm a confident DIY, but I'm not sure where the blower motor is to replace it. Can you guys give me any help? Thanks in advance!

Slade901

There were some thread here that points out to a bad blower fan resistor causing the fan to operate only on the highest setting.

__________________
1999 Dodge Truck RAM 1500 1/2 ton 4WD V8 360 Z 5.9L SFI QUAD CAB Sport Ed
1999 HONDA TRUCK PASSPORT 4WD V6 03165 3.2L MFI
1997 MERCURY SABLE 6 Cylinders 182 U 3.0L SFI
1994 PONTIAC GRAND AM L4 138 3 2.3L MFI SOHC QUAD
1990 OLDSMOBILE CUTLASS V6 191 T 3.1L MFI
1981 MERCEDES BENZ 240D 4 Cylinders 02399 2.4L DIESEL

kbcracing

[quote=Joesabo]My heat is only blowing out at the highest setting(5) and the blower sounds funny. QUOTE]
My '99 blower motor only puts out on the 3-4-5 settings and was told to replace the Blower Resistor Connector.
I did this on a different '99 at my friends shop and it worked for the customer's car.
Hope it works for you.

__________________