justinofdurham

hey guys i have to leave for work at 4-15 and its 2-40. my dumb ass shop teacher noticed that my license plate lights were not working so we found out that whoever installed the aftermarket bumper had not hooked up the lights. so he played with them touched the wires etc.... then my new fog wouldnt work. i got home and i was like im gonna fix these but i need to test the on my truck first. so i the headlights work but if you leave them on when the car is off they dont make that annoying noise. so i checked the tailights and those dont work nor do the license plate lights. the brake lights work and i have not checked the reverse lights but i believe they work. can anyone put any input in as to why my fog lights tail lights and license plate dont work now that they are properly connected? any ideas would be appreciated. the quicker the better thanks guys.

busa_4

It Sounds Like He Has Blown A Fuse.

OverBoardProject

I'm too late to help, so I will just say if you haven't found the problem take it to your shop teacher in the morning, and tell him that since he caused the problem he can fix it.

Besides it should be a good lesson for both him, and the students

dblthebass

yes, agree with busa_4 about checking the fuse, if it is blown you need to find out why it blew. check the fog lights make sure you didn't make a short to ground when you installed them

BlazerLT

What a dumbass teacher.

__________________
1995 Factory Blazer Service Manual for sale, PM if interested.

dmbrisket 51

im a little late, but that annoying ass sound, the fuse for it is the same as your tail lights... catch my drift