|
Re: radio for an f150
I just went thru this in the Escort forum, since the radio's are the same I'll copy and paste it...
First you need 1 or 2 peices of wire coathangers bent into U shapes, about 5 inches from the bottom of the u to the forks on it. (10 inch wire bent in half or so.)
Copied:
"They go in about 2 inches, no more, there are 4 metal clips that are to be pushed in towards the radio, all Ford vehicles have these from like 91-96, and all the radio's are interchangeable. 10 Inches is way to far, that's past the radio. If you have a tape deck, stick your DIN pins in about 2 inches and put a finger in the tape deck and gently coax it out. If you dont have a tape deck, use a flathead screwdriver behind the faceplate GENTLY to pry it out while pressing on the DIN pins, which once you stick the coathangers in about 2 inches you can feel and push away from the radio with the coathangers (Moving them in towards the pins inside the dash.)
Hope I helped..."
|