|
Our Community is 662,000 Strong. Join Us. |
1985 s10 blazertmonty211 07-19-2004, 03:51 AM hey the mph gauge and oil presure gauge dont work on my 85 blazer v6 4x4. can any one help me find a solution on fixing these tacks??? also in 2nd - 5th gear the tranny slips but only at full throtle. could this be the clutch or the tranny? the clutch is almost gone and ctches at the last 2 in. on the pedle. can any one help me with any of there questions?? thanks monty211 u can e-mail me if you have any questions or solutions snaggletooth08@yahoo.com smokey041369 07-20-2004, 11:48 AM slippage with a manual trans is cause by 1. clutch out of adjustment or 2. bad clutch mph- replace the cable oil pressure- the senor is located by the oil filter check the wire and remove the sensor to see if it plugged TuckerR1980 07-20-2004, 07:20 PM One thing to also check is take your dash apart and check the plug on the back if they are not all the way snapped in you wont get any reading for your oil pressure. But only do this after making sure it is plugged into the sensor b/c its not a fun job taking everything apart Automotive Network, Inc., Copyright ©2012
|