Str8in

Does anyone know the size of the fron door speakers on a 87 si?
T.I.A

cvcc_wagon

my bro got 6" speakers for his 89 crx (pretty nice aftermarket ones) i rmemeber tearing it apart, its pretty adaptable for anything in that size range. i have an idea tho, pull the cover off and have a look

__________________
-Andrew Smit-
mail to: smit_andrew (at) hotmail (dot) com

~Attention! if you are thinking about a D16A1 swap for your Civic/CRX and don't know where to start go Here. Thanks.~

Str8in

you see thats the problem the car has no speakers or radio so i cant just take a speaker out n look.

cvcc_wagon

look in the hole and measure it, my bro didnt have any speaker either, it was kinda funnie actually because we didnt know that when he got it, we just thought it had no deck so when we put one in and got everything hooked up (very clean i mite add, he got a honda adapter and everything and it looked beautiful, damn i do good work...) there was no sound and i was like, did u check to see if there were actually speakers? anyway, the frounts were just 6" and the holes lined up, they should be the same for you. if u are still worried go to a wreckers and pull one out and take it with you when u get the new ones.

__________________
-Andrew Smit-
mail to: smit_andrew (at) hotmail (dot) com

~Attention! if you are thinking about a D16A1 swap for your Civic/CRX and don't know where to start go Here. Thanks.~

briea

any place you go to buy speakers should know. just tell them what car you got and if they dont know they can look it up. but i got an 86 si and the are 6"

QuackerStacker

now i have a 86 si but it is close and mine came stock with little like 3 inch speakers but you can upgrade easly to at leat 6inch

__________________
~Michael Alexander~

DarkstarCRX13

Stock front speakers are four inch but you could get bigger if you wanna make the hole bigger

Condor

4 inch on the front speakers. you can put in 5 1/4 using the original grills by enlarging the white plastic brackets (cut them out), then, because the tweeter part will most likely not let the original cover back on, you have to CAREFULLY snip the plastic on the back of the grill, leaving just the cloth part. This will then fit, maintaining the original look of the 4 in speakers. Be careful not to rub the window handle across the cloth when you roll down the window.

Condor

ONLY cut the back of the speaker cover - the plastic supports where they touch the tweeter. If you cut all the plastic out it will be ruined.