Integra Leather seats?

KoRnSaQ · 11-04-2003, 10:28 PM

I was wondering if anyone has switched the back seats in a hatch with the integra leather back seats, if so how hard is it and do i have to modify anythin to make them work. Also, how would i fit the front seats in, what would i have to do to the brackets to make them fit in right. thanks in advance for the help, i am wanting to switch them all out ASAP

KoRnSaQ · 11-06-2003, 05:13 PM

Bump!!!!!!!!!

travagliante · 11-06-2003, 10:08 PM

Hey ok i did the front seats swap and the are awesome. Basically all you need to do is switch the rails from your civic or crx and you can only use some of the original holes for the new seats. Check out www.4thgenerationcivic.com and check out the how to section the tell you how to do the swap. I followed their instructions and they look great.

Currently im in the process of redoing my interior to black leather. Ive already swaped an integra conole the whole center upper console. Ex AC controls, radio, etc. which was really hard and you have to modify and cut your counsole and everything but it looks really awesome.

Oh yeah also i have started on the rear seat conversion to the 94+ integra seats. I have heard it can be done. I havent got a chance to finish it but i am going to this weekend.
Ill tell you guys later ow it worked.

Hope this all helps.

GTA · 11-06-2003, 10:28 PM

i have 94 integra cloth seats in my car. the top half of the back fits like stock, bottom half isnt bolted down in mine (no one sits back there anyway). The fronts... what i did was swapped the civic inner rail (ones near center of car) to the teg seats since they will bolt onto it. you just gotta drill the welds off the teg seats to get its stock rail off. that rail will bolt in now. Then you make brackets from strips of metal to go from the stock outside location to where the teg rail is.

finished product

KoRnSaQ · 11-06-2003, 11:01 PM

Thanks for the info guys, i just wanted to make sure it was goin to be worth the hassle before i buy the seats, and it looks like it wont be to hard to do and i know it will be worth it.

travagliante · 11-06-2003, 11:06 PM

Yeah i think it is definatley worth it. I got my seats of ebay for 500.00 for the front and back. I got them so cheap because the guy didnt have to ship them so i picked them up and it was all good. Mine came from a 200 gsr i believe and they are black mint condition leather. But its definatley worth it thr are such a better and more comfortable seat....

ZC4ME · 11-07-2003, 12:26 PM

Quote:

Originally Posted by GTA

i have 94 integra cloth seats in my car. the top half of the back fits like stock, bottom half isnt bolted down in mine (no one sits back there anyway). The fronts... what i did was swapped the civic inner rail (ones near center of car) to the teg seats since they will bolt onto it. you just gotta drill the welds off the teg seats to get its stock rail off. that rail will bolt in now. Then you make brackets from strips of metal to go from the stock outside location to where the teg rail is.

finished product

Did this rail configuration bias the seat to one side or the other, or is it still pretty much centered? TIA.

peace
Griff

GTA · 11-07-2003, 02:06 PM

still pretty much centered.

POST REPLY TO THIS THREAD