Egad! My son replaced the master control unit for my power windows & locks & now my two keyless entry remotes don't work. The local dealership is gonna :evillol: CHARGE :evillol: me for this 5 minute procedure. Does anyone know how I can program this myself (and yes, I did change the batteries :icon16: )!!!

try this. I have a 93. This is prcedure.
sit inside, close all doors.
place ignition in "off"
open drivers door and leave open throughout
move mechanical door lock switch to lock
turn ignition to "run"
aim transmitter at reciever and press "lock". Hold till led on transmitter blinks twice. door locks should cycle.
turn ignition off within 20 seconds
can program up to 4

try this. I have a 93. This is prcedure.
sit inside, close all doors.
place ignition in "off"
open drivers door and leave open throughout
move mechanical door lock switch to lock
turn ignition to "run"
aim transmitter at reciever and press "lock". Hold till led on transmitter blinks twice. door locks should cycle.
turn ignition off within 20 seconds
can program up to 4


This Procedure will also work on a 1997 GC Limited.I have tried it and it works.Thank you. :smokin: :smokin: