how do i reset the change oil soon light? i have done it before but i forgot the sequence. i was also wondering if there is any way to turn off the daytime running lights.
I tried the pump the gas thing and here's what happened: 3 times and the side marker lamps went off, 4 times turned them back on. But now when i use my remote start (viper) the lights dont flash like they used to. And when i set my alarm, the marker lights flash. before i tried this stuff, the marker and head lights flashed when i set the alarm. Wierd.
Anyone know where i can find a book that would tell me about resetting warning lamps, etc.?
Anyone know where i can find a book that would tell me about resetting warning lamps, etc.?
Look in your owners manual..the reset procedure is in there
__________________
Why do you never have enough time or money to do the job right the first time, but enough time and money to do it again?
Got all the certifications
25 years ASE Certified Master Technician
GM WCT
Yea..I work at a DEALERSHIP....got a problem with that?
After changing the engine oil, With the ignition in RUN but the engine off, Fully push and release the accelerator pedal slowly three times within five seconds. If the CHG OIL SOON light is flashes, the system is resetting. Turn the key to off and then start the vehicle. if it don't work repeat the procedure.
I tried the pump the gas thing and here's what happened: 3 times and the side marker lamps went off, 4 times turned them back on. But now when i use my remote start (viper) the lights dont flash like they used to. And when i set my alarm, the marker lights flash. before i tried this stuff, the marker and head lights flashed when i set the alarm. Wierd. 
NO Problem
