Taillight bulb replacement

tmf2 · 09-05-2003, 05:44 PM

Whats the secret ? I can't seem to get to the bulb. Is this a sealed unit
if so how to you get into it ?

Thanks Dennis

SapphicCat · 09-16-2003, 04:49 AM

What year rodeo, and which rear light?

ldg427 · 10-07-2003, 10:41 AM

Quote:

Originally Posted by tmf2

Whats the secret ? I can't seem to get to the bulb. Is this a sealed unit
if so how to you get into it ?

Thanks Dennis

I am having the same problem with my 2000 Rodeo. I'm trying to get to the taillight bulb on the driver side and have undone the 2 screws on the side as well as the one underneath but it still doesn't seem to want to come out. Were you able to figure out?

Thanks

ldg427 · 10-07-2003, 03:31 PM

Quote:

Originally Posted by ldg427

I am having the same problem with my 2000 Rodeo. I'm trying to get to the taillight bulb on the driver side and have undone the 2 screws on the side as well as the one underneath but it still doesn't seem to want to come out. Were you able to figure out?

Thanks

Nevermind. If I had taken just a little longer the first time I would have figured it out. I've replaced the bulb.

cnn · 11-03-2004, 01:10 PM

I can't figure how to get the tail light out to replace the brake bulb. How do you get the bottom screws out w/out taking off the bumper? It's a 1999 Rodeo. I've checked all the threads in this forum. Thanks.

amigo-2k · 11-03-2004, 04:46 PM

http://www.geocities.com/endre_rl/isuzufaq.htm#faq46

cnn · 11-03-2004, 06:49 PM

Thanks, but my problem is I can't figure out how to take out the bottom screw. I'm mechanically challenged I guess.

2eyefishclaw · 11-03-2004, 09:38 PM

stand behind the vehicle grab hold of the lamp assy. and pull hard straight back

cnn · 11-03-2004, 10:56 PM

I still can't figure out how to get to the bottom screw (between the bumper and the bottom of the assembly). There's hardly room for the thickness of a finger let aone a screwdriver...and that's with the screw all the way in. What am I doing wring?

amigo-2k · 11-03-2004, 11:38 PM

You need a long narrow screw driver to get it out.

cnn · 11-05-2004, 01:35 PM

Thanks for all the help. The problem was I was looking at the wrong bottom screw. The only ones I could see attached a piece of trim to the bottom of the assymbly. I couldn't see the one that attached the assymbly to the body!

2000RodeoLS · 12-02-2004, 12:05 PM

I am sorry, can someone please tell me where the screw that attaches the assembly to the body located? is it located behind the small piece of trim at the bottom of the light assembly? I am having a hard time locating the third screw? Thank you in advance!!

Dober89 · 12-02-2004, 05:45 PM

Theres the 2 on the side and ones on the bottom towards the inside of the truck. Its sorta hard to see and you need to use a long screwdriver to get it out. Its basically right above the bumper.

cnn · 12-02-2004, 11:22 PM

it's so simple but so hard...just get a flashlight and look at the bottom of the glass assembly...it's a dark phillip's head at the bottom rear of the assembly.

2000RodeoLS · 12-14-2004, 10:15 PM

Quote:

Originally Posted by cnn

it's so simple but so hard...just get a flashlight and look at the bottom of the glass assembly...it's a dark phillip's head at the bottom rear of the assembly.

THANK YOU!! That was driving me crazy! IT is not an easy feat, either! Thanks again very much!

POST REPLY TO THIS THREAD