my sister has a 95 Cavalier with the base motor, pretty sure its the 2.2L. it has a very annoying valve ticking problem so i wanted to know if you guys knew the spec as to what the valves should be adjusted to.
im not sure what your looking for, but im lookin at my haynes manual now and this is all i see....
95-97 2.2L OHV
intake ............ 0.0010 to 0.0027 inch (0.025 to 0.069 mm)
exhaust .......... 0.0014 to 0.0031 inch (0.035 to 0.081 mm)
Valve face angle ..... 45 degrees
Valve seat angle .....46 degrees
Margin width.........1/32inch
Valve spring
Free length.......1.95 inch (49.5mm)
Installed height..1.71inch (48.7mm)
