Is donkeypunchperformance gone?

[grandma]

Originally Posted by xeroinfinity

MMS HAD problems but as far as I have heard they are not anymore.

That 3500 swap is no where near what MMS stage 1 or 2 is.
Thier heads are using stock valve springs and valves
You can goto a salvage yard and buy all those part for half that $1500.

And Vipey,
you should know by now, GAGT....
I think I know a little more then those posers


Ok a lot more

A lot of people on grandamgt.com can't get ahold of Milzy. His site hasn't been updated in quite awhile. So I would assume he is having some form of issues or whatnot. There was a lengthy thread about his pushrods not being up to snuff.

Donkeypunchperformance is a no show, they haven't even updated since 2005 from what I can tell.

If you want to go to the junkyard to get parts that's no problem either, 3400 top ends are a dime a dozen, the 3500, still a new motor.

and how are people on GAGT poseurs? From that statement I'm a poseur as well?

[xeroinfinity]

Originally Posted by grandma

A lot of people on grandamgt.com can't get ahold of Milzy. His site hasn't been updated in quite awhile. So I would assume he is having some form of issues or whatnot. There was a lengthy thread about his pushrods not being up to snuff.

Donkeypunchperformance is a no show, they haven't even updated since 2005 from what I can tell.

If you want to go to the junkyard to get parts that's no problem either, 3400 top ends are a dime a dozen, the 3500, still a new motor.

and how are people on GAGT poseurs? From that statement I'm a poseur as well?

Did they try and reach him by phone ?

I seen a few 3500s in the heap, why just yesterday I saw two great looking 3500s with under 10k miles

IMO they are posers,
they seem pretty cocky on most aspects and tend to punk on every new person that signs up.
They are mostly young nowitalls

edit...........
BTW I'm a member of every GA site on the net , that I know of anyway..

[grandma]

Originally Posted by xeroinfinity

Did they try and reach him by phone ?

I seen a few 3500s in the heap, why just yesterday I saw two great looking 3500s with under 10k miles

IMO they are posers,
they seem pretty cocky on most aspects and tend to punk on every new person that signs up.
They are mostly young nowitalls

so I'm a young know it all, hmmmmmmmmmmm. from what i've seen you've only posted twice on gagt.com anyway. there's a lot of good knowledge on there if you search a bit.

I don't know if they tried to reach them on the phone or by email or by carrier pigeon. As you see I'm a 2.4L lover. It's a shame the 3.4L/3.1L guys just can't keep up.

[Vipey1337]

Originally Posted by grandma

so I'm a young know it all, hmmmmmmmmmmm. from what i've seen you've only posted twice on gagt.com anyway. there's a lot of good knowledge on there if you search a bit.

I don't know if they tried to reach them on the phone or by email or by carrier pigeon. As you see I'm a 2.4L lover. It's a shame the 3.4L/3.1L guys just can't keep up.

Not all of us can afford to bring a 4 banger GA into the 12's... especially a GA V6...

[xeroinfinity]

Originally Posted by grandma

so I'm a young know it all, hmmmmmmmmmmm. from what i've seen you've only posted twice on gagt.com anyway. there's a lot of good knowledge on there if you search a bit.

I don't know if they tried to reach them on the phone or by email or by carrier pigeon. As you see I'm a 2.4L lover. It's a shame the 3.4L/3.1L guys just can't keep up.

This is still undeceided, but if the shoe fits wear it.

I dont even remember posting at all, but I could have.
I'm sure I wasnt looking for any help help

The only reason the 4cyl can keep up with a v6 is because most have 5spds and have a big wieght diff.
My SE V6 would probly keep up with most nonstock 4cyl or SC as far as that matters

[grandma]

Originally Posted by xeroinfinity

This is still undeceided, but if the shoe fits wear it.

I dont even remember posting at all, but I could have.
I'm sure I wasnt looking for any help help

The only reason the 4cyl can keep up with a v6 is because most have 5spds and have a big wieght diff.
My SE V6 would probly keep up with most nonstock 4cyl or SC as far as that matters

The weight difference is actually less than 200lbs more than likely closer to less than 150lbs difference. Another note would be that most of the production run of the 4cyl was in automatic form not manual. This is especially true in the 1999+ models.
I bet you're a 15 second car still

[xeroinfinity]

The weight difference is actually less than 200lbs more than likely closer to less than 150lbs difference. Another note would be that most of the production run of the 4cyl was in automatic form not manual. This is especially true in the 1999+ models.
I bet you're a 15 second car still

Are you a comedian ?
.... because that is funny

[Gir-_-]

Originally Posted by grandma

The weight difference is actually less than 200lbs more than likely closer to less than 150lbs difference. Another note would be that most of the production run of the 4cyl was in automatic form not manual. This is especially true in the 1999+ models.
I bet you're a 15 second car still

[grandma]

Originally Posted by xeroinfinity

Are you a comedian ?
.... because that is funny

I'm sorry you're running 13's.

[Jmoney3318]

Im with Xero on this Grandma i think GAGT.com is lil immature with the way they treat new m,emebers dont get me wrong tho they got great info on there like if i need a how to or any info i go to that site but if i need to talk to people i post here cuz dealing with GAGT is like dealing with my g/f on her period.

[grandma]

Originally Posted by Jmoney3318

Im with Xero on this Grandma i think GAGT.com is lil immature with the way they treat new m,emebers dont get me wrong tho they got great info on there like if i need a how to or any info i go to that site but if i need to talk to people i post here cuz dealing with GAGT is like dealing with my g/f on her period.

I guess people get their panties in a twist too easily?

[roboticgod]

just to twist things up a little more I know and work for JC.
I can verify that his SE is pretty damn fast!! I am usually co-pilot running the laptop. Our last 1/4 run was 13.8 sec @ 113 mph and it was 55 deg, thats fast! As soon as I find the rest of his super charger parts he will be running in the12's, at least!

I own a 2000 Cobra, the only modifications are a CAI and the Borla exhaust that came on the car. He beats me out of the hole and througout most of the 1/4 every f****n time
I know my V8 has more hp and torq ! His weak points is the crappy 4t45e tranys and the stock bottom end on his 3.4. This is being taken care of real soon, parts are on the table as we speak.
This summer he(we) is installing the 4t65HD then we'll see how track runs go.

I have tons of video but he trashed my phone so I dont have any wya to upload my sim card but when I do I will post them so you GA guys can have some mouth watering vids to feed on.

shit I'd better go, he's barking about me being in his office, hehehe

[grandma]

Originally Posted by roboticgod

just to twist things up a little more I know and work for JC.
I can verify that his SE is pretty damn fast!! I am usually co-pilot running the laptop. Our last 1/4 run was 13.8 sec @ 113 mph and it was 55 deg, thats fast! As soon as I find the rest of his super charger parts he will be running in the12's, at least!

I own a 2000 Cobra, the only modifications are a CAI and the Borla exhaust that came on the car. He beats me out of the hole and througout most of the 1/4 every f****n time
I know my V8 has more hp and torq ! His weak points is the crappy 4t45e tranys and the stock bottom end on his 3.4. This is being taken care of real soon, parts are on the table as we speak.
This summer he(we) is installing the 4t65HD then we'll see how track runs go.

I have tons of video but he trashed my phone so I dont have any wya to upload my sim card but when I do I will post them so you GA guys can have some mouth watering vids to feed on.

shit I'd better go, he's barking about me being in his office, hehehe

Which supercharger? Are you trying to retrofit a GTP charger on there? Going to Z-spec for their leaky nonsense? Sourced the rare as hell 3.4 supercharger kit?

What are you guys tuning with to get this amazing 13.8@113mph.. what track did you guys run at? What's he running in the 60ft?

My last run was 12.4@112mph so your times sound a touch fishy to me.

[xeroinfinity]

Watch the potty mouth Trevor!!

I have the RSM SC which did take some modifications to work properly when roboticgod had it on his 99 GA.
It did have kinks, but it was bought from them long ago for around $3k I think. Different pulley too

He cant really tell what software we use thats a trade secret
But its not anything you or anyone else can go buy.
Its just as good as DHPs tuner, maybe even a little butter

I've had 0 track time. With slicks and at a track my times should raise even more.
If I had a turbo, sheesh.... Look out!

[roboticgod]

Sorry bout that JC.

beter luck nettime
Forgot this was a pg-13 site

later on fools