Random Chatter - Page 13

s10blazerman4x4 · 08-14-2006, 05:26 PM

Yeh thats what i thought. I thought it said it was 6.99 and it rang up 9.99 so when im in there on Friday for brake fluid again ill check. I added a quarter bottle to compensate for the line thats leaking out back. I found a pic of a guy who did the conversion on his 90 to a 97 and they include fenders hood bumper and lights. Pretty much everything to do it and he added the bedsides in the rear for good measure and all the lines look good.

http://www.desertrides.com/photo/you...ride.php?id=23

The link/

s10blazerman4x4 · 08-15-2006, 12:32 PM

Hey can anyone tell me how to make ATI Catalyst detect second monitor?
Ive been following there instructions and its not detecting. I did get the monitor and cables from HP but still have to go buy an audio cable because there nitwits. Anywho im going to switch the cables. I have the main monitor plugged into the graphics card and the HP in the original monitor plug connection. Thinking i am going to swap them around and see.

s10blazerman4x4 · 08-15-2006, 04:19 PM

I have some computer issues/errors maybe some one can give me a lead on. I did some google searching but am getting no where. Here are the errors.

The following appear on shutdown:
SW.AcroRd32.exe it is trying to access memory it is not there
Something about NetBroadcast1.1
endprogram.sw
THe one about netbroadcast might be something with the ATI Catalyst Control Center?
I also have a dwwin.exe error message

After i restarted i went and started to look around i also have this

When i go Start run and type in regedit it tells me that it is not a valid win32 system app but i can type regedit.com and regedit.exe and it works?
The above error also came when i went to PC Tools HP reinstall software that came with computer, it would not allow me to reinstall.

Also i have a Runner Error (updates from HP.exe) lacks a '-' (the ap id separator)

Also had other problems today when i went to start the HP Image Zone it always has worked now today it is looking for a file from a disc. This is how i became aware of the above file issue.

So any ideas on where to start? Im starting to get annoyed with these errors along w the memory error i have had since i bought the computer when shutting down w the wireless linksys adapter trying to reference memory that is not there. That one existed even after i took it down to ground zero.

EDIT EDIT EDIT

FOR THE HP Runner issue it appears spybot destroyed some stuff that is listed as spyware from HP and i am going to try a system restore and see if it fixes it.

EDIT EDIT EDIT

For WUSB54G4v.exe referenced memory at such a point and could not read the memory there error which i get 2 of from googling i see i mite have to replace the RAM as the other steps that are listed no work.

Also system restore did not work. Lol

BlazerBoyLT98 · 08-16-2006, 05:10 PM

Guess what guys and gals??? I am a married man come next friday. Is it normal to be shitting your pants???

s10blazerman4x4 · 08-16-2006, 05:17 PM

How long have you known? Lol you never told me but i thought something was up when i saw your myspace today.

CONGRATSSSSSSSSSSSSSSSSSSS

Make her sign a prenup, she gets the blazer you get the house.

BlazerBoyLT98 · 08-16-2006, 05:29 PM

HAHA yea she gets the Blazer!!! The death trap!!!

blazee · 08-16-2006, 06:19 PM

Quote:

Originally Posted by BlazerBoyLT98

Is it normal to be shitting your pants???

Quote:

Originally Posted by s10blazerman4x4

How long have you known?

I think that is one of those things that becomes appearant as soon as it happens.

Congrats Jim.

s10blazerman4x4 · 08-16-2006, 07:29 PM

Quote:

Originally Posted by blazee

I think that is one of those things that becomes appearant as soon as it happens.

Congrats Jim.

Lol True very true

s10blazerman4x4 · 08-16-2006, 08:32 PM

Got a ? when i bought the ranger i noticed that there seemed to be water towards the edges of the cab inside both doors. Today i went and investigated for a lack of better term and found massive quanties of water under passenger carpet. Here is the problem, i looked under the truck and there is no rust holes. Second i felt the headliner and its dry. I checked all door rubber and its dry and there appears to be no where it could come in. Im thinking of taking off the wiper cowl and seeing if them drains are plugged. But here is the real stickler. The guy before me must have had the issue too because on both driver and passenger sides at the door sill guard he cut the rubber flooring i guess to dry it out. So i just kinda faciliatated that enough because there was a huge puddle on passenger side floor board under the rubber flooring and the mat under that. So does anybody got ideas? I checked everything inside and didnt see where it would come in. I think the cowl will come off just for security but i dont know how best to dry it up becuz i dont wanna cut a big section of the floor rubber out.

mike1224 · 08-24-2006, 12:05 PM

lost my friggin glasses last night at work. I was working the frozen section again, and a pallet fell over in the freezer. So I took some stocking carts intothe freezer where my glasses began to fog up. As I felt safer not having my glasses on at the time, I took them off, so I could see w/o fog. skip ahead 1/2 hr when mess gets cleaned up, can't find glasses. Spent quite a while looking, but nada. told the recieving clerk that if any glasses are found in the freezer, there probably mine. Heading down to LensCrafters now to buy new pair. Gotta pay out of pocket, my insurance allows glasses every 2 years, and that'll be in 5-6months. This is the money I was planning on using for a 20" widescreen for the comp. Im guessing the glasses will show up a few days after I pay for new ones.

also got a new AMP. 2400Watts. shoot that focker hits nicely, right now only have 1000Watts going to it, but im still very satisfied.

muzzy1maniac · 08-24-2006, 12:57 PM

Quote:

Originally Posted by mike1224

lost my friggin glasses last night at work. I was working the frozen section again, and a pallet fell over in the freezer. So I took some stocking carts intothe freezer where my glasses began to fog up. As I felt safer not having my glasses on at the time, I took them off, so I could see w/o fog. skip ahead 1/2 hr when mess gets cleaned up, can't find glasses. Spent quite a while looking, but nada. told the recieving clerk that if any glasses are found in the freezer, there probably mine. Heading down to LensCrafters now to buy new pair. Gotta pay out of pocket, my insurance allows glasses every 2 years, and that'll be in 5-6months. This is the money I was planning on using for a 20" widescreen for the comp. Im guessing the glasses will show up a few days after I pay for new ones.

also got a new AMP. 2400Watts. shoot that focker hits nicely, right now only have 1000Watts going to it, but im still very satisfied.

Why is it that most frozen workers have glasses?? All these years and I still find it kinda funny when they come stumblin out of the freezer. Too bad about loosing them though. Next time you go to work they'll be on the desk waiting for you.

I just got done putting in some componant speakers today. Now I need to go for a ride and see if I like them!

s10blazerman4x4 · 08-24-2006, 08:09 PM

Don't forget us produce workers,

Got a ? Im looking at shocks and i dont know what to go with. Im stuck between KYB GasaJusts or the Superlift Superrides. Thing where i get confused is i am going to lift the truck suspension wise 1.5". To do this i am going with the 1.5-2.5" add a leaf lift in the rear coupled with lift coils in the front. I like the KYBs because they are a really stiff shock but on Summit when i goto amount raised and i select 0-2" it only gives me the Superlifts, so i am not sure that the KYBs will work. I am getting the leaf and the rear shocks done first, followed by the front springs and shocks.

mike1224 · 08-24-2006, 11:02 PM

Quote:

Originally Posted by muzzy1maniac

Why is it that most frozen workers have glasses?? All these years and I still find it kinda funny when they come stumblin out of the freezer. Too bad about loosing them though. Next time you go to work they'll be on the desk waiting for you.

i dunno why most frozen clerks wear glasses, on the night crew at my store, all 6 of 7 employees wear glasses. Lol i like the stumbling too, just when its not me. I know I'll find the glasses since i spent most of the morning getting new glasses.

muzzy1maniac · 08-25-2006, 11:19 AM

Speakers sound great! They're pyle 6.5" componant - I know not the best brand but for $32 I gave it a shot!! What a difference in bass over stock and they're crystal clear.

mike1224 · 08-25-2006, 04:59 PM

Quote:

Originally Posted by muzzy1maniac

Speakers sound great! They're pyle 6.5" componant - I know not the best brand but for $32 I gave it a shot!! What a difference in bass over stock and they're crystal clear.

did you replace all speakers?? obviously the ones in the dash look very simple to take out and replace, but what about the ones in the door panel? Speakers have been on my list for a little while now, but they keep getting put lower on the list.

POST REPLY TO THIS THREAD