vss

[mrfirebird]

OK , i have , yellow to power
lt grn/blk to temp sensor (i am getting a reading)
blk/wht to ground
i still have dark green, gray and brown.
does anyone have an idea which goes to the vss wire on the ecm ?
looking at the plug with the leads facing you from left to right i have yellow,blk/wht,drk grn,lt grn/blk,gray,brown.

i'm guessing that the dark green from the compass itself is to be hooked to the a10 terminal.
thanks to all . i'll finish install friday and post my results

[rlith]

Look at my previous posts in this thread. It's A10 on the 24 pin connector at the ecm

[blazee]

According to chcknugget's pic. it should be the dark green.

[mrfirebird]

thanks for all the help.

[mrfirebird]

thanks for all the help. it's installed and working, kind of !!!!
compass is off on direction, does the power wire have to be connected to a continious 12v supply? i have mine to a switch supply so it auto shuts off with the key.. thanks again