Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Performance Discussion about performance modifications and issues. |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-21-2004, 12:29 PM | #1 | |
AF Newbie
Join Date: Jul 2003
Posts: 15
Thanks: 0
Thanked 0 Times in 0 Posts
|
RB26 swap to a R32 GTS-4
Iwas looking into doing a swap to an RB26 into my R32 Gts-4.. what are the differences and what all do i need other than the obvious? Is the engine harness and engine mounts the same? If any one could shed some light on the matter please do let me know. Or better yet if someone has experience doing so..
Thanks Cheesey_boi
__________________
4 door skylines do it for me |
|
09-21-2004, 10:45 PM | #2 | |
Skyline Man
Join Date: Nov 2001
Location: Show me state, Missouri
Posts: 4,800
Thanks: 0
Thanked 1 Time in 1 Post
|
Mounts on the RB26 are alloy, the ones to the block. Other than that they are identical. It will bolt right up to your trans so no drama's until you plan on pushing some serious hp as in above 450hp then your trans won't last long if at all.
The looms are different, so is the coil pack loom, the ecu is totally different, and fuel pump. If you're getting a complete engine it is the best option or you will have to do the fuel pressure reg also. Exhaust is totally differnt to the cat.
__________________
You don't own a Skyline, then don't cry to me about it! 1992 Silver R32 GTR tickled to 450hp. - Sold when I left NZ in 2004 Arguing on the Internet is like competing in the special olympics. Even if you win, you're still retarded. Never confuse kindess with weakness. AF user guidelines, Please remember to abide by them |
|
|
POST REPLY TO THIS THREAD |
|
|