Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
01-14-2008, 02:38 PM | #1 | |
AF Enthusiast
Join Date: Jan 2008
Location: Virginia Beach, Virginia
Posts: 1,396
Thanks: 71
Thanked 63 Times in 58 Posts
|
Can I swap my 350lb srpings to the rear and get some 600lbers for the front? (or 550)
First off... looking at the car it looks like the coilovers are the same on all 4 corners w/ the only difference being the spring rates. Assuming they're the same size etc I'd like to swap my 350 fronts to the rear and get new fronts... can I do that?
I checked the PNs and verified that I have 350 front springs and 200 rear... pretty darn soft. Shold I get 550 front or 600? My buddy said that w/ a coil over all the sprnig pressure is gone once the car is in the air, so I can just remove the coil over, pop off the top retainer, and swap springs... easy peazy... yes?
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
01-14-2008, 04:10 PM | #2 | ||
AF Newbie
Join Date: Jan 2008
Location: Alpharetta, Georgia
Posts: 27
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Can I swap my 350lb srpings to the rear and get some 600lbers for the front? (or 550)
Quote:
I'm sure you realize after you've done this swap that the car's ride height will need to be reset and re-corner weighted on scales. |
||
01-14-2008, 10:27 PM | #3 | |
AF Regular
Join Date: Dec 2007
Location: Albuquerque, New Mexico
Posts: 308
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: Can I swap my 350lb srpings to the rear and get some 600lbers for the front? (or 550)
I'm going to do the same thing. The suggestions I've been given by John (Panoz Lead Engr) and Gary Jones was to go to 550# up front and swap the 350# to the rear. That's where the Series cars start with springs. This might be soft as well, especially for smooth tracks.
I'm sourcing springs right now. My car has H&R springs. The P/N is R25100350 on the front and R25100200 on the rear. Please let me know if you run into any trouble with the swap. I'll do the same. Soflow1 is correct that the car will need to have it's ride height re-set and corner weights balanced (corner-to-corner) after this operation.
__________________
Jerry 1999 Panoz GT-RA |
|
01-14-2008, 11:05 PM | #4 | |
AF Enthusiast
Thread starter
Join Date: Jan 2008
Location: Virginia Beach, Virginia
Posts: 1,396
Thanks: 71
Thanked 63 Times in 58 Posts
|
Re: Can I swap my 350lb srpings to the rear and get some 600lbers for the front? (or 550)
^ Yep I know... I'll most likely do it after my first NASA event end of February. I was curious about the Konis too... I was goning to get fresh Konis and do the spring chang-a-roo and ad a rear swaybar to dial in the car.
__________________
Brian B. Panoz GTRA - LS1 swap in progress #4 Z06 - NASA ST3/TT3 |
|
|
POST REPLY TO THIS THREAD |
|
|