Who here Actually owns a Skyline

[trboskyline]

this is my baby..stock internals..carbon fiber all around..pics didnt work..email me for some pics..and we can talk skyline: tinytownhustla@hotmail.com

[r33 girly]

Basic mod's for now. Till after the "brisbane auto salon".

My baby girl....

[Gtr2.7L]

H3 BNR-32

AH-3 Red Pearl

Engine:
2.7L Bore-up, N1 pistons, stock crank/con-rods
HKS GT2540's
HKS SuperPowerFlo Intakes
HKS Hard Pipe induction kit
Sard 534cc injectors
Greddy 1.8mm Metal Head gasket
Sard Type-R Fuel regulator
Greddy Remote filter and oil cooler kit
Trust MBC
HKS Super Drager exhaust, front pipes, straight pipe
Various decorative items (aka rice)....Oil cap, radiator cap, shift knob...etc.

Transmission:
OS Giken Twin Plate

Body:
Veilside C-I combat kit, Front/rear Aero, wing. Stock side-skirts

Interior:
Trust Boost Guage
Sony X-plod MD player (wish I could take that one back)
Nismo 320 kph Speedo

Dyno'd 383@4 wheels, 1.08 Bar, 26 deg C ambient.
This was the first complete run, but the fourth actual run....problems with the MBC. Tech insisted car would have posted 410-420 AWHP had we completed the first run.

I'll post pics as soon as I get it back (I think I posted them on this site a couple years ago...before my rebuild). It's currently down with Hiro and the guys at Blast racing (right next to Motorex...)

[kimron]

My car has been modified with a few bolt-ons and power has increased by approximately 30% to 320hp+ and 260+ lb/ft of torque.
It sports 17in Volk Racing CV Pro 17x8 and 17x9 multi-piece wheels(255/40-17r, 235/45-17f), Cusco racing coilovers, Whiteline strut brace, Greddy Type S blow off valve, custom made 3" downpipe, Apexi 4" stainless steel exhaust(cats removed), Apexi super suction air intake kit, NGK Iridium sparkplugs, Apexi GT Hybrid bar and plate intercooler, Blitz Dual Turbo Timer and an Apexi AVC-R Boost Controller running 12+ psi of boost raised from the standard 7psi. I also recently added a Stage 3 six-puck clutch from Australia. The exterior has been treated with a GTR wing and Skyline 400R front bumper. Everything else on the car is stock.
With the help of a Gtech Pro Performance Meter, my best acceleration stats to date are 0-60mph in 5.4 seconds and a 1/4 mile best of 13.93 @ 107mph and that was done with just a Turbo XS HPBC running 11psi but before the addition of the Apexi AVC-R, front mount intercooler and blow off valve. I would expect those times to drop to the mid 13's since the additions but have not yet tested it.

[scourge2u]

My R32 GTS4. I'm selling it because I'm moving to the mainland and its too expensive to move it ($1200USD to ship to Osaka). Will get an R32 GTR if I stay here or I'll get an M30 if I move back home to go back to school.

[GTR_in_SF]

Finally got around to taking some pictures of my GTR...

[GTR_in_SF]

Here's another...

[GTR_in_SF]

And another...

[GTR_in_SF]

One last one...

[iNARK]

Heres mine.... VERY tame compared to most of the ones here.

Performance:
-Chipped ECU
-Bleed Valve
-POD Filter
-Stock turbo running 14psi
-Stock Cooler
-Daiken Exedy Racing Clutch
-3" Exhaust

Only puting out about 143kw or 191.77hp or 194.43ps at the wheels

Interior:
-OBX Racing seats
-Steeringwheel
-RAZOR metal gear nob

Aesthetics:
R32 GTR Front end conversion.(still in progress)
-R32 GTR Front Bar
-R32 GTR Front Guards
-17"x7.5"/17"x8" 7 Spoke Enkeis with 215/235 respectively
-Spoiler removed with flat boot

Suspension:
-Street Tune Potenza Damper Adjustable Shocks
-Lowered springs

Heres some pics of it before i started on the project:
http://members.optushome.com.au/inark/mycarpics.html

Heres some pics of the car in the latter stages of the GTR front end conversion:

http://members.optushome.com.au/sau_...almostdone.jpg
http://members.optushome.com.au/sau_...cks/sideon.jpg
http://members.optushome.com.au/sau_...s/wheelson.jpg

[moondog]

Here are ours (only links, cos my web provider gets all pissy if I hotlink to anything )

The Great Silver Whale - my car

Andy's (Spec2Girl) GTt

The Great Silver Whale has only a cat-back exhaust (with a resonator in place of the cat) and a Trust Airinx pod filter, but got 173 kW at the wheels with a dodgy air flow meter (and a clogged cat, for what that's worth )

The 34 is standard atm, but goes like a cut cat anyway

[taranaki]

Count me in-just! GXi AUTO,1992,white pics after I've groomed it.

[bladerider]

I have a liner...

99 R34GTR
Bayside Blue standard bodywork

HKS Induction kit
HKS Hardpipes
HKS Downpipes
HKS Decat
HKS Hiper Muffler
HKS Iridium plugs
HKS GT2510s with uprated actuators
HKS 256/264 cams
HKS Pulleys
New valves in race flowed head
Matched ported plenum, throttle bodies, inlet, head, and exhaust
HKS Steel gaskets for inlet, exhaust and 1.6mm head
HKS Gasket set for everything else
Nismo bearings, shells etc
HKS 87mm Forged Pistons and uprated pins
Reworked lightened balanced rods uprated bolts
Balanced treated crank
Tomei Sump Baffle kit
Nismo Oil Pump
Nismo Water pump
HKS GT Intercooler
Silicon connector hoses, and water pipes etc
Greddy Uprated fuel rail
Nismo 600cc injectors
Abbey fuel pressure regulator
Braided fuel lines
HKS Fuel pump
HKS EVC5
Apexi Power FC
HKS Knock sensor
Anything alloy has been polished to the max!!
Trust springs
DS2500 brake pads
Uprated Clutch (cant remember which one !! lol)
Tracker
Alarm
Pager
Soon to be filled with high end audio, courtesy of Genesis

That'll do for a while methinks !!

James.

[Skyline_salesman]

i own 4 GTR-33 's 2 are vspec and the others are stock. One is rated at 538 hp to the wheels using fuel rail, larger injectors, oil cooler, larger front mount and other cool shit. I have a blue one lowered on 19's with a steel first gear in gear box stage 5 clutch, and short throw shifter, a white GTR- 33 stock along with its twin, silver GTR-33 stock

[RazorGTR]

Salesman and Bladerider post some pics by hook or crook. No BS in this thread guys, you continue and I am getting out my whippen stick