Who has "battle scars" from this dangerous passtime? - Page 3

Math · 03-09-2003, 08:13 AM

Quote:

My incident happen when i was at 11 years old. It kind of stupid, I was cutting the UHU glue on the opener of the tub, (because the glue can't get out) then slice part of my skin and flesh out of my tumb... it wasn't pain at all, but did nothing to it cause my brain is empty, do not know what to do next, the blood started to run wild. I walk to the kitchen with my hand at my back and walk to take a cloth before going to wash room. I wash it with water, but it doesn't stop. My mom ask what's the blood on the floor, I told her is the chicken bleed (can you believe it, the chicken is already dead long ago, and I said that...lol) She scream at me and I learn a lesson.

lol

supratuner · 03-09-2003, 08:20 AM

last summer i was working on chopping the top of an ITR to make it a convertible! well, i was moving the knife towards me and it ended up chopping off 1/2 my thumb, now i have a huge scar there

then once again i was working on making a sun roof on my last ITR ( see thread on this page some where ) and i did the same thing again, but it cut my pinky

Bimmerkid · 03-09-2003, 10:16 AM

Broke a bottle of Model Master paint while attempting to open it, long slice right across my thumb.

deedlit · 03-10-2003, 10:29 AM

- Several cuts in the fingers. On all of my fingers.

- X-acto in my leg. The knife was rolling on the table ; I tried to catch it but missed and found it back into my leg.

- paint in the eye. A f....g Humbrol bottle that didn't want to open.

- paint in the mouth. I held the brush between my teeth by the wrong side. I was stoned with the paint

That's all folks !!!

k_dog · 03-10-2003, 10:57 AM

hehe...one time. I sliped and poked myself on the tip of my thumb w/an exacto, well It hurt....BAD, but when I did it, I droped the exacto and it went strait into my ankle chipping part of the bone. LOL....Talk about a double whammy....
Brian

lotus_man · 03-10-2003, 11:06 AM

More cuts than I care to remember in 25 years of modelling. Most painful was grabbing the wrong end (read: hot end) of a solidering iron while working on an RC car a few years back. Sizzled quite well and smelt terrible...

RyanGiorgio · 03-10-2003, 11:07 AM

I posted a thread like this a while ago called "modelling injuries". But anyway, I cut myself with x-acto knives all the time. I have a nice scar on my thumb from one that went through to my nail. It seems that everytime i change the blade to a fresh new on, i cut myself with it.

Guido · 03-10-2003, 01:46 PM

That is WEIRD... :shocked:

Are you guys modelling with chain saws and stuff

I've never cut myself or anything and the one time I did, it was so light that I can't even remember.

Carefull guys, we don't want accidents.

integra818 · 03-10-2003, 01:48 PM

I have more cuts on my fingers than hair on my head (no I'm not bald

)

daggerlee · 03-10-2003, 01:50 PM

Quote:

Originally posted by RyanGiorgio
I posted a thread like this a while ago called "modelling injuries". But anyway, I cut myself with x-acto knives all the time. I have a nice scar on my thumb from one that went through to my nail. It seems that everytime i change the blade to a fresh new on, i cut myself with it.

This thread was from before you wer registered

I haven't had an injury in quite a long while....people, take your time!! it helps!!

fwdfreak · 03-10-2003, 01:53 PM

nothing bad for me, just some stoners from sprayin primer

SirWelshy · 03-10-2003, 02:21 PM

has cut myself many times but luckly no scars

but worse was last summer when i tryed to slice my thumb in two starting at tip of nail n working way down evenly to the knuckle hit bone too but no stitches or scars

Mean_B16 · 03-10-2003, 03:01 PM

I cut of my right arm one time but is was O.K. because I just scratch built a new one and now I am good to go! I just have do be careful around camp fires, lol:cwn27: :cwn27: :cwn27: :cwn27: :cwn27: :cwn27: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe:

Mean_B16 · 03-10-2003, 03:02 PM

Quote:

Originally posted by Mean_B16
I cut my right arm clean off one time in a CRAZY body kit attempt, I thought I new custom body would look good on me, it hurt but is was O.K. because I just scratch built a new one and now I am good to go! I just have do be careful around camp fires, lol:cwn27: :cwn27: :cwn27: :cwn27: :cwn27: :cwn27: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe: :hehehe:

fullbloodchop01 · 06-25-2003, 10:24 PM

was hackin at a piece of resin today, and it was harder than i thougt, so i decide to put on a fresh #11 blade, well soon after i think i was puttin too much pressure on the knife, well it slipped and went straight into my thumb! i mean this has to be the 100th time i cut my thumb but this time it was deep, it was soo deep i could actully see the meat stickin out of my thumb

it must have cut about 1/8 of an in deep and basically skinned a part of my thumb, since when i took off the paper towle it pulled up my skin and it was almost like i created a damn pocket, it never hurt, just bled more than a womens group around that time of the year (

)
i guess i gave to much info, well here are some pics (i put alot of ointment on it nd it is healing up pretty good)

next time i guess ill wear some leather gloves

Thread Thread Starter Forum Replies Last Post

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2002 SL1 - Help from someone who has one..	kcwillia	SC/SL/SW	1	01-30-2009 08:39 AM
who has used these? car emblems from msm and mfh	stryfe101	Car Modeling	11	05-03-2007 09:19 PM
Who has ordered from www.1999.co.jp ??	MEKANIK	Car Modeling	16	05-19-2003 12:48 AM
Who has more pics of this Hatch	slammedcivicsi	'88 - '91 Civic \| CRX \| Wagon \| Shuttlee	3	05-06-2003 04:55 PM

POST REPLY TO THIS THREAD