Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Pathfinder | Terrano | QX4 | Xterra | Patrol | Safari | X-Trail Nissans greatest 4WDs and SUVs |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
03-01-2005, 01:00 PM | #1 | |
AF Newbie
Join Date: Sep 2004
Location: Beacon, New York
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
SES Engine code P1140
I just wanted to pass along a bit of information that may save one or two of you a couple of bucks (maybe more). I had my SES light on and came up with code P1140. After looking at several other threads regarding this engine code I figured I buy a VTC (cam sensor) and put it in myself. I didn't want to go to local Nissan so I did some research. I found a web site called www.nissanpartscheap.com and got the sensor for$48.94 plus $6.50 shipping. If you have this same problem and go to Nissan they will charge you anywhere from 80 to 90 bucks just for the sensor. I put the cam sensor in myself and it took about ten minutes; reset the light and problem solved. I didn't really look at other parts on the web site but the cam sensor was about half price. Hope this helps someone.
Last edited by DRYGSXR; 03-03-2005 at 11:54 AM. |
|
05-02-2005, 07:32 PM | #2 | |
AF Newbie
Join Date: May 2005
Location: Granville, Massachusetts
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
That was a great help, thanks alot!
Just ordered it from online... Where exactly is the sensor? no special tools needed right? |
|
|
POST REPLY TO THIS THREAD |
|
|