Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Ford > Crown Victoria
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 06-02-2008, 02:08 PM   #1
bigchevyguy
AF Newbie
 
Join Date: Jun 2008
Location: Jerome, Idaho
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
06 CV long crank time only after refueling

Please help....I am a chevy tech at a dealership. I have been brought a 2006 crown vic interceptor from our sheriffs dept. After refueling the vehicle, it takes an extremely long cranking period to get it to start. It usually has to start and die a few times before it will stay running. The fuel pressure is within ford specs and it has no codes in it. The vehicle has no alternative type fuel system on it, Just a regular 4.6 (w) Any thoughts would be great. Thanks
bigchevyguy is offline   Reply With Quote
Old 06-02-2008, 07:26 PM   #2
way2old
TOKEN HILLBILLY
 
way2old's Avatar
 
Join Date: Mar 2005
Location: Lexington, Kentucky
Posts: 3,353
Thanks: 1
Thanked 23 Times in 23 Posts
Re: 06 CV long crank time only after refueling

What are the O2 sensors reading at startup? It may be too rich at start up causing the long crank times. Long shot might be evap system allowing fuel to enter on start up. Post back readings if you can. LTFT both banks. O2 readings, anything that may be related to running rich or very lean. Also look at the iidle speed motor.
__________________
Being way2old is why I need help from younger minds

The sooner you fall behind the more time you'll have to catch up.
HEY Y'ALL--READ THIS
Here are some of our old vehicles for sale.

way2old is offline   Reply With Quote
Old 04-02-2021, 10:35 PM   #3
fmlinms
AF Newbie
 
Join Date: Apr 2021
Location: Duck Hill, Mississippi
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 06 CV long crank time only after refueling

Have a 2005. Had the same problem for a long time after purchase. Found that holing the accelerator to the floor while starting like a flooded carb would start it right up. Might have to start more than once but revving a bit above idle would usually stop that. Quit doing that after a number of miles.

Do you know what 3 sets of five beeps might mean after every start.
fmlinms is offline   Reply With Quote
Old 04-19-2021, 06:34 PM   #4
silicon212
Confoundingly Lucid
 
silicon212's Avatar
 
Join Date: Oct 2005
Location: Mesa, Arizona
Posts: 3,897
Thanks: 5
Thanked 30 Times in 30 Posts
Send a message via ICQ to silicon212
Re: 06 CV long crank time only after refueling

Quote:
Originally Posted by fmlinms View Post
Have a 2005. Had the same problem for a long time after purchase. Found that holing the accelerator to the floor while starting like a flooded carb would start it right up. Might have to start more than once but revving a bit above idle would usually stop that. Quit doing that after a number of miles.

Do you know what 3 sets of five beeps might mean after every start.
Wow, talk about a necropost.

Sets of 5 beeps usually indicates a fault with the airbag system. The light on the dash will flash a sequence of times, i.e. one flash pause 8 flashes pause indicates a code 18. You can then look up that number on line to see what the issue is. It might be something as simple as the pass indicator light being burned out.
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1!
2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness!
1967 El Camino L79/M20 old school asphalt raper

Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have.
silicon212 is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Ford > Crown Victoria

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:28 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts