Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Automotive News Desk
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools Search this Thread
Old 11-10-2009, 09:33 PM   #1
cm1
AF Newbie
 
Join Date: Aug 2008
Location: franklin, New York
Posts: 25
Thanks: 1
Thanked 1 Time in 1 Post
Code - P0340 no cam signal to PCM-info

Sorry if this isn't the right place for this, but I think it's not vehicle specific,and it might help someone, I only included vehicle info for back ground.
This may help someone out there.
It's 02 Liberty LTD 4x4 3.7L
It came into the shop on the hook, of course when I went out the following Monday it started right up and ran fine.
I pulled code P0340 no com signal to PCM, so I went into data display and everything looked fine. after it warmed up and was still running fine, so I took it out, well after about 7mi. it quit the scan tool showed no cmp (cam position sensor), signal and no cmp - ckp (crank position sensor) sync. While cranking the cmp stayed flat, then started reading, it started and I headed back to the shop, stalled and started lots of times till the battery went dead, so I called my partner and had him get a cmp, and bring the jump box. I changed the cpm on the side of the road, guess what it didn't work, so we towed it back to the shop.
Today I checked & cleaned all engine grounds, quite a few had high resistance, I also checked the wires from the cmp to the PCM. Restarted and let run for 40 min. engine temp 210 Deg. it quit. I noted the ckp was still showing a signal when the engine wasn't turning over. I got a new ckp and tested the resistance of the old one vs. the new one, (no lab scope), it showed the old one had low resistance, so I put the new one in.
I let it run from 45 min. w/no problem, so I road tested for a short trip around the block a couple of times with no problems. I drove it home 15mi. and it's doing fine.
I don't know why the ckp threw a cmp code but it did, so if your having a P0340 code ck the ckp also. Maybe some of you already know this, but it was new to me.
I hope this helps someone
cm1 is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD


Bookmarks
Go Back   Automotive Forums .com Car Chat > Automotive News Desk

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 02:20 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts