Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
08-26-2021, 05:57 AM | #16 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
I got the part off, it doesn't look to great, can you tell if this could cause a problem, it does slide in and out ok, not sure if the motor is any good
|
|
08-26-2021, 08:41 AM | #17 | |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: Van stopped running, then ran very roughly
Yes it looks to be in rough shape, if it were me I'd replace it. You shouldn't be able to manually slide it, so if you can it's likely broken. You should also look inside the hole it came out of. If there is any carbon build up in there get some Q-Tips and some carb cleaner to take care of cleaning it out.
|
|
09-04-2021, 09:19 AM | #18 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
I replaced the part, it will actually idol on its own now, but when I press on the gas the engine slows down a little then will rev up and it does idol a little rough, any ides?
Thanks for all your help so far |
|
09-05-2021, 08:59 AM | #19 | |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: Van stopped running, then ran very roughly
Did you remember to disconnected the battery afterwards to clear out the ECM memory?
|
|
09-05-2021, 03:15 PM | #20 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
No I didn't, does this have to be done? I need a smog done and I am trying to not to have to drive it around to have it ready to connect to the smog machine, if I need to do this I will.
|
|
09-06-2021, 08:47 AM | #21 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
Gezz I dont know whats going on with this thing, I removed the battery cable for 20 minutes put it back on and it dosent seem to want to idol again, it take a bit of coaxing with the gas pedal to keep it going. whats going on with this thing?LOL
|
|
09-06-2021, 09:47 AM | #22 |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: Van stopped running, then ran very roughly
|
09-07-2021, 09:03 AM | #23 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
So i tried about 15 times and it does idol again but still boggs down then revs up when I put my foot on the gas
|
|
09-07-2021, 09:22 AM | #24 |
AF Enthusiast
Join Date: Mar 2005
Location: 0,0,1
Posts: 722
Thanks: 1
Thanked 25 Times in 24 Posts
|
Re: Van stopped running, then ran very roughly
|
09-07-2021, 10:21 AM | #25 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
Yeah I was thinking TPS also, I will replace it and check everything else you recommend, thanks for your help
|
|
09-12-2021, 09:47 AM | #26 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
So its still not working right, again when I push on the gas it idols down a bit then revs up, whats your thought on replacing the MAP Sensor?
then all three sensors on the throttle body are replaced. |
|
09-12-2021, 12:48 PM | #27 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
on my map I was getting .7 oms reading on the two outer pins and 42.3 ohms from the center pin to either side, does that side right?
|
|
09-21-2021, 06:05 AM | #28 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
|
|
09-24-2021, 11:34 AM | #29 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
anyone? Any ideas would be appreciated
|
|
10-23-2021, 09:56 AM | #30 | |
AF Newbie
Thread starter
Join Date: Apr 2005
Location: La, California
Posts: 72
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Van stopped running, then ran very roughly
https://www.youtube.com/watch?v=z20i-oG1sF8
I checked the voltage out on the TPS plug does this make sense? I replaced the signal wire right from the PCM to the plug to make sure it wasn't shorting |
|
|
POST REPLY TO THIS THREAD |
|
|