Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
11-24-2015, 10:32 PM | #1 | |
AF Newbie
Join Date: Nov 2015
Location: Bellevue, Washington
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Oil Leak 2011 Hemi
Noticed a small oil leak that seemed to be getting worse. Appeared to leak from the oil filter.
Took it in for an oil & filter change. The next morning, I noticed a spot of clean oil on the garage floor. Since she has a new filter, it is unlikely that the filter is leaking. She has 29,000 miles and synthetic oil. If it isn't the oil filter, what above the filter could be leaking? Thanks for your help. |
|
11-25-2015, 06:17 PM | #2 | |
AF - Advisor
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,919
Thanks: 112
Thanked 41 Times in 39 Posts
|
Re: Oil Leak 2011 Hemi
I have the best luck finding leaks by looking at night with a good flashlight...no daytime light interfering.
__________________
1992 Bravada, 201K, stock 1997 Bravada, 101K, stock...was "called away" "Cornbread Red", 2001 Dodge 2500,4X4,HO Cummins Diesel,QC,SWB,6spd.,Banks boost&pyro,US Gage fuel press.,Edge Drag Comp,4"exh.,cowl hood, bhaf, black Holley pump, 140gph...13psi WOT, Vulcan Big Line, kevlar/ceramic single disc clutch, cheapo fuel cooler, 8x.010" vco injector nozzles, Cat turbo 62-65-.70A/R, 497hp 1089 tq 8/25/14 Time to turn so's you don't burn. |
|
11-27-2015, 05:09 PM | #3 | |
AF Newbie
Thread starter
Join Date: Nov 2015
Location: Bellevue, Washington
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Oil Leak 2011 Hemi
As fate would have it, the leak may have been fixed when the oil/filter were changed.
After inspecting, wiping and driving, i put fresh paper under the truck & voila, no leak so far. Thanks for the help. |
|
11-27-2015, 05:42 PM | #4 | |
AF - Advisor
Join Date: Mar 2004
Location: Nashville, Tennessee
Posts: 2,919
Thanks: 112
Thanked 41 Times in 39 Posts
|
Re: Oil Leak 2011 Hemi
You know the oil pan is made of plastic so the drain plug torque is very important...don't want to overtighten and possibly damage the threads. The torque is 25 ft lbs.
__________________
1992 Bravada, 201K, stock 1997 Bravada, 101K, stock...was "called away" "Cornbread Red", 2001 Dodge 2500,4X4,HO Cummins Diesel,QC,SWB,6spd.,Banks boost&pyro,US Gage fuel press.,Edge Drag Comp,4"exh.,cowl hood, bhaf, black Holley pump, 140gph...13psi WOT, Vulcan Big Line, kevlar/ceramic single disc clutch, cheapo fuel cooler, 8x.010" vco injector nozzles, Cat turbo 62-65-.70A/R, 497hp 1089 tq 8/25/14 Time to turn so's you don't burn. |
|
|
POST REPLY TO THIS THREAD |
|
|