Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
07-01-2013, 07:31 AM | #1 | |
AF Newbie
Join Date: Mar 2008
Location: Emmen
Posts: 28
Thanks: 0
Thanked 0 Times in 0 Posts
|
Lower Control Arm Bush
1998 406 Break 1.8 16v
The rear mounting bush on my left hand front lower control arm has worn out and is causing noise. Parts here are very expensive so I have taken to ebay for a replacement. I found this Peugeot 406 Front Left or Right Suspension Control Arm Bush With Bracket | eBay Can any one tell me if this is the right part and if it just slips over the end of the arm and bolts down or do I need some special tool to fit it. The haynes manual is essentially useless on this but looking at the car it visualy looks like if I just remove the two mounting bolts it will slip off the end of the arm and the new one will slip on. |
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|