Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
JDM Motor & Parts info/chat Discussions on Mugen, Spoon etc. Plus, info on motor swaps (b18 's, b16's h22's etc) and other JDM info! |
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
09-04-2006, 08:55 AM | #1 | |
AF Newbie
Join Date: Sep 2006
Location: daytona beach, Florida
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
jdm prelude piston/rod
help- looking for source for jdm parts (wholesale preferably) for friends 93 prelude/ in the business
need now- standard piston (2) and rod (1) Honda/Prelude/vtec/1993/H22a-1/domed/p13 casting/ |
|
09-04-2006, 07:22 PM | #3 | |
There is no Spoon
Join Date: Aug 2002
Location: CNY, New York
Posts: 6,941
Thanks: 286
Thanked 223 Times in 185 Posts
|
Re: jdm prelude piston/rod
You sure all that info is right there? Because it's not a good idea to use just 2 jdm pistons in a H22a1 (a usdm engine), this will mess up your compression ratio. The only jdm pistons I've seen for the h22 is the type s ones, which are even higher compression than the regular jdm h22a's. And rods are the same for jdm and usdm, so you might as well just go for the usdm ones, since there's a lot easier to find. Try www.hondaautomotiveparts.com or www.slhondaparts.com for those.
|
|
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|