Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Saturn > SC/SL/SW
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 10-01-2022, 03:04 PM   #1
dj1111
AF Regular
 
dj1111's Avatar
 
Join Date: Mar 2005
Location: Midwest
Posts: 195
Thanks: 0
Thanked 2 Times in 2 Posts
Brake line(s) ruptured

I was working on the front brakes and once complete I went in the car and pumped the brakes to expand the calipers. A couple of pumps and suddenly the pedal went to the floor. That was a sick feeling. This is a 2000 SL2. Looked under the car and the lines going to the rear brakes where wet for several feet with fluid and one or both burst and brake fluid was dripping fast. I'm really sad.

In my younger days I would have been up to the challenge and likely changed the lines myself. But now I just don't feel like diving into it. I payed $4700 for it in 2005 and have driven it for over 17 years now. It's given us a long history of dependable driving. But last year the fuel pump went out and then the ignition control module and coil packs. Plus it needs tires before winter. It's to the point where what's next?

Looking at the brake lines it looks like a pretty big job. And all the clips and screws holding the lines to the frame and brackets are pretty rusty. I live in the upper Midwest so there's the salt in winter. Plus it would be much better to do this with a lift which I don't have.

Has anyone out there replaced the brake lines on one of these? And if so would you ever do it again, LOL?

Last edited by dj1111; 10-02-2022 at 07:46 AM.
dj1111 is offline   Reply With Quote
Old 10-01-2022, 08:33 PM   #2
Blue Bowtie
Registered Offender
 
Blue Bowtie's Avatar
 
Join Date: Mar 2006
Location: Rural
Posts: 6,513
Thanks: 6
Thanked 341 Times in 336 Posts
Re: Brake line(s) ruptured

Wholesale replacement is sometimes easier than piecemeal replacement of just a few sections. The number of rusted fittings involved can really escalate the labor times.

I've done complete replacements on 4WAL systems which usually involve at least 8 lines. Making new lines with bubble flares in copper/nickel tubing is the only way to go here in the rust belt. That would cover everything from the master cylinder, through the ABS unit, and on to each wheel where hoses connect.

Some shops do this routinely and can be surprisingly economical compared to dealerships and certainly compared to replacement car payments. It may be worth asking around.
__________________
Permanent seat assignment on the Group W bench...
Automotive Forums Survival Guide
Blue Bowtie is offline   Reply With Quote
Old 10-02-2022, 11:38 AM   #3
dj1111
AF Regular
Thread starter
 
dj1111's Avatar
 
Join Date: Mar 2005
Location: Midwest
Posts: 195
Thanks: 0
Thanked 2 Times in 2 Posts
Re: Brake line(s) ruptured

Quote:
Originally Posted by Blue Bowtie View Post
through the ABS unit
Mine does not have ABS. Should make it easier.
dj1111 is offline   Reply With Quote
Old 10-02-2022, 01:55 PM   #4
fredjacksonsan
Caution: Monkeys bite!
 
fredjacksonsan's Avatar
 
Join Date: Apr 2004
Location: near Denver, Colorado
Posts: 10,109
Thanks: 14
Thanked 67 Times in 62 Posts
Send a message via AIM to fredjacksonsan
Re: Brake line(s) ruptured

Quote:
Originally Posted by Blue Bowtie View Post
Wholesale replacement is sometimes easier than piecemeal replacement of just a few sections. The number of rusted fittings involved can really escalate the labor times.

I've done complete replacements on 4WAL systems which usually involve at least 8 lines. Making new lines with bubble flares in copper/nickel tubing is the only way to go here in the rust belt. That would cover everything from the master cylinder, through the ABS unit, and on to each wheel where hoses connect.

Some shops do this routinely and can be surprisingly economical compared to dealerships and certainly compared to replacement car payments. It may be worth asking around.
+1 on a one piece brake line replacement.

A good shop will be able to bend to fit, if the original part is not available.


But dj1111, you have a good point. A 22 year old car can nickle and dime you to death. Everyone's different on tolerance but as a wise man on e said, "you either make payments, or you make repairs".
__________________
Ours: 2020 Jeep Wrangler 2.0, 53k
2013 Toyota FJ Cruiser, 84k
Kids: 2005 Honda CRV, 228k
fredjacksonsan is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Saturn > SC/SL/SW

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:01 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts