Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Opel/Vauxhall > Commodore/VS/VT/VX
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 04-12-2008, 09:21 PM   #1
broz177
AF Newbie
 
Join Date: Apr 2008
Location: Melbourne
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
High Beam Issues

Need some help please! my VS commodore's high beams flash on their own when my headlights are on, they just flicker on and off randomly! Have no idea what could be causeing this, anyone experienced this before??

thanks all!
broz177 is offline   Reply With Quote
Old 04-19-2008, 02:21 PM   #2
-Davo
Banned
 
-Davo's Avatar
 
Join Date: Aug 2003
Location: Sydney
Posts: 3,748
Thanks: 0
Thanked 0 Times in 0 Posts
Re: High Beam Issues

There's a problem with the cables in the light dova-hicky. That thing.

Changed your stearing wheele recently?
-Davo is offline   Reply With Quote
Old 04-22-2008, 07:41 AM   #3
broz177
AF Newbie
Thread starter
 
Join Date: Apr 2008
Location: Melbourne
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: High Beam Issues

Hmm no i havent changed the wheel at all in fact.
Though i can see how this area could cause an issue.. ill have to take a look at getting inside there.

Thanks Davo
broz177 is offline   Reply With Quote
Old 04-30-2008, 09:39 AM   #4
-Davo
Banned
 
-Davo's Avatar
 
Join Date: Aug 2003
Location: Sydney
Posts: 3,748
Thanks: 0
Thanked 0 Times in 0 Posts
Re: High Beam Issues

It sounds like a cable has detached, the connectors are loose or the switch is playing up. Did you get it fixed?
-Davo is offline   Reply With Quote
Old 05-01-2008, 04:30 AM   #5
broz177
AF Newbie
Thread starter
 
Join Date: Apr 2008
Location: Melbourne
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Re: High Beam Issues

No not yet, unfortunately. I want to get inside it to take a look but not sure how hard it would be. hopefully i can get onto it this weekend. thanks for all your help!
broz177 is offline   Reply With Quote
Old 04-11-2009, 10:24 AM   #6
kimbo2
AF Newbie
 
Join Date: Apr 2009
Location: adelaide
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Re: High Beam Issues

This appears to be a common fault with VS Commodores.
I have fixed two of these at no cost.
The fault lies in the turn signal/high beam switch.
To repair...
Lower the adjustable steering column, remove the upper & lower steering column plastic covers & remove the turn indicator assy by manipulating the tangs.
Unplug the two wiring connectors & you have the turn signal assy in your hand.
Utilising very small screwdrivers or scribers or whatever suits, lever open the retaining clips & separate the two halves of the switch very carefully, noticing where the springs & 3 flat plates came from.
You need to bend the largest plate SLIGHTLY in the middle (maybe 5 degrees) to adjust the distance between the plate contacts & the high beam contacts.
I'm sorry that I can't be more specific about which direction to bend it but you'll have to sus it out as I did.
The fault seems to arise from one half of the plastic housing lifting slightly under spring pressure & allowing the high beam contacts to be too close together when they should be at rest in low beam position.
Typically the high beam comes on or flashes on its own & low beam can only be selected by holding the turn indicator stalk in a certain way.
The alternative of course is to buy a new turn signal assy.
I wouldn't recommend buying a second hand unit from the wreckers as it may have the same fault or soon will.
If you've had the headlights on & noticed the high beam flash momentarily as the turn signal indicator cancels then that is another sign that the turn signal switch is nearing the end of its life unless you do the abovementioned fix.
Cheers

Last edited by kimbo2; 04-12-2009 at 07:56 AM. Reason: additional indication of turn signal switch incipient failure
kimbo2 is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Opel/Vauxhall > Commodore/VS/VT/VX

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:56 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts