Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
11-27-2016, 07:24 PM | #1 | |
AF Newbie
Join Date: Nov 2016
Location: Houston
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
1997 3.1 Lumina ECM?
Mine started running rough intermittently and progressively got worse. I've checked and/or replaced most every thing MAP, MAF, EGR, TPS etc... This weekend the fuel injectors. Now it's throwing a P1200 trouble code.
I'm wondering if its the ECM? can these be checked?? |
|
11-28-2016, 06:49 AM | #2 |
A990 racer
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 16,946
Thanks: 25
Thanked 369 Times in 363 Posts
|
Re: 1997 3.1 Lumina ECM?
__________________
|
11-28-2016, 04:50 PM | #3 | |
AF Regular
Join Date: Dec 2012
Location: Portland, Maine
Posts: 438
Thanks: 0
Thanked 47 Times in 47 Posts
|
Re: 1997 3.1 Lumina ECM?
The code refers to the fuel injection control circuit. This could mean your fuel injectors are going bad, so that's one thing to look into. The part that makes this difficult is the fact that luminas from that final generation were often electrical basket cases. So other causes could be the wiring harness getting all f*cked up resulting in short circuits and other things of that nature, so you may want to check the wiring harness. You asked about the ECM... there's a distinct possibility that there's a problem with that as well.
__________________
"Ok, systems check; the battery is discharging, the oil temperature is very high, the oil pressure is very low, the engine temperature is off the end of the scale, I'm running out of petrol... but the clock is correct!" -James May, in an old, worn out Lamborghini purchased for less than £10,000. |
|
11-28-2016, 06:29 PM | #4 | |
AF Newbie
Thread starter
Join Date: Nov 2016
Location: Houston
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 1997 3.1 Lumina ECM?
Thanks for the replies. I guess I'll just dig in!!!
|
|
|
POST REPLY TO THIS THREAD |
Tags |
ecm , p1200 |
Thread Tools | |
|
|