Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
02-22-2005, 09:27 PM | #106 | |
AF Enthusiast
Join Date: Aug 2004
Location: Roanoke, Indiana
Posts: 723
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 240sx FAQ "Suggestion Box"
it can go on either, s14 or s13 from what i understand
if you go intercooled i bet you could get about 7psi, but why would you want to risk it (Stay with 5 until you upgrade injectors, etc) you will already have an fmu if you buy the stage 1 kit (it comes with it) i would say you could get away with an fmu for about 6 psi i really dought it would bolt right up, that would be a coincidence if it did, but you would be better off buying the kit, you're going to need the stuff in that kit anyways..
__________________
mods list: t3/t04e, iap oil lines, iap i-c piping, xspower i-c, z32 mafs, enthalpy tuned ecu, 615cc injectors, s14 tomei fuel pump, blitz DD bov, tial 38mm w/g, BD exhuast mani./downpipe, Spec StageIII clutch . .s13 power. power estimate at ~ 270 whp @ 11 psi. |
|
02-22-2005, 11:20 PM | #107 | |
AF Enthusiast
|
Re: 240sx FAQ "Suggestion Box"
cool beanos thanks
|
|
02-25-2005, 07:05 PM | #108 | ||
240SX Guy
|
Re: Re: 240sx FAQ
Quote:
2) Not much. I don't think they make wastegate springs that small. 3) As soon as you boost the engine. I listed all of the fuel upgrades options in that "Turbo questions" thread I believe. Fuel Management Units are too cheap not to use. Even 4:1 is better than nothing, but I would recommend a 6:1 for T3 sized compressors and an 8:1-10:1 for T4 sized compressors. 4) I believe Revhard only makes T4 flanged manifolds now. But a Mitsubishi turbo will not fit a Garret flange. Look into the Greddy manifold as it is flanged for a Mitsubishi turbo. Not sure if it is the same though.
__________________
-Cory 1992 Nissan 240sx KA24DE-Turbo: The Showcar Stock internals. Daily driven. 12.6@122mph 496whp/436wtq at 25psi |
||
02-25-2005, 07:07 PM | #109 | |
240SX Guy
|
Re: 240sx FAQ "Suggestion Box"
Boostdesigns kits no longer come with a FMU.
__________________
-Cory 1992 Nissan 240sx KA24DE-Turbo: The Showcar Stock internals. Daily driven. 12.6@122mph 496whp/436wtq at 25psi |
|
02-27-2005, 10:56 PM | #110 | |
AF Regular
|
??
ive just recently bought a 89' 240 and i need to replace the engine in it....what can i replace the stock motor with so i dont have to change the ecu and all that other bull-jive technical stuff....also whats the displacement and stuff like that?
sorry for the newbie questions.. |
|
02-28-2005, 03:53 PM | #111 | |
Banned
|
Re: 240sx FAQ "Suggestion Box"
ECU tuning comes into account with every engine.
|
|
03-02-2005, 09:19 PM | #112 | ||
AF Enthusiast
Join Date: Aug 2004
Location: Roanoke, Indiana
Posts: 723
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: ??
Quote:
ka 24 (d) = dual over head cams e = electronic fuel injection ^ ^ engine 2.4L of displacement series you wont have to replace the ecu if you swap an engine for the same exact engine type.
__________________
mods list: t3/t04e, iap oil lines, iap i-c piping, xspower i-c, z32 mafs, enthalpy tuned ecu, 615cc injectors, s14 tomei fuel pump, blitz DD bov, tial 38mm w/g, BD exhuast mani./downpipe, Spec StageIII clutch . .s13 power. power estimate at ~ 270 whp @ 11 psi. |
||
04-04-2005, 11:56 PM | #113 | |
AF Vendor
|
Re: 240sx FAQ "Suggestion Box"
This question may have been answered, but I cant find it. I'm planning on going with a late model 240 for my next car, and I was wondering which motor the KA or the SR, can be built to be a bit more powerfull up top. I prefer racing from a roll, so which would be better to fit that roll out?
__________________
2006 Redline Red Nissan 350Z Base K&N|Falken I am just that JDM tight, yo.
|
|
04-05-2005, 05:30 PM | #114 | |
240SX Guy
|
Re: 240sx FAQ "Suggestion Box"
Either.
Better question.... What are your goals? |
|
04-05-2005, 10:50 PM | #115 | |
AF Vendor
|
Re: 240sx FAQ "Suggestion Box"
Well, I'm not out looking for a massive power uber drag monster, I'd be fine with a low14, high 13.I'd like something that can really get up there and move, but also be a pretty good daily driver.I've heard of boosted cars being somewhat of an event to drive, and I'm not really looking for something like that. Nissan has really just now started to catch my eye, so I dont really know a whole bunch about their cars in general, other than the Skyline.
__________________
2006 Redline Red Nissan 350Z Base K&N|Falken I am just that JDM tight, yo.
|
|
04-06-2005, 05:06 PM | #116 | |
240SX Guy
|
Re: 240sx FAQ "Suggestion Box"
Either the SR or the KA can do that. Both will involve about the same amount of money. Both would make good daily drivers. I drive my KA-T every day. What do you mean being an event to drive? I always though for a street car, boost is the way to go.
|
|
04-23-2005, 03:31 PM | #117 | |
AF Enthusiast
Join Date: Mar 2004
Location: Winnipeg
Posts: 312
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 240sx FAQ "Suggestion Box"
ok, i didn't find this in the FAQ or anything but..
i might be able to get a pretty good deal on an 5sp sr20det motorset locally, but right now, i'm auto. if i were to get this, what else would be required? getting that would eliminate the big parts right, what else would i need besides the pedals? |
|
04-23-2005, 04:28 PM | #118 | |
AF Enthusiast
Join Date: Apr 2005
Location: Snowdon
Posts: 2,753
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 240sx FAQ "Suggestion Box"
www.srswap.com has a writeup on it, with a few pics to, check the SR install guide and about half way down they get to the auto-manual swap.
|
|
08-27-2005, 09:14 PM | #119 | |
AF Enthusiast
Join Date: May 2004
Location: Alpharetta, Georgia
Posts: 1,075
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 240sx FAQ "Suggestion Box"
Just wanted to add, here are different 240sx owner manual for CA18DET, KA24E, KA24DE, S14 and some more.
http://www.zeroyon.com/index/content/view/24/47/
__________________
VR6> Anything FWD sucks for understeer? Swaybars do magic. |
|
08-27-2005, 11:25 PM | #120 | ||
The Media Guy
|
Re: Re: 240sx FAQ "Suggestion Box"
Quote:
__________________
AF User Guidelines <----Click and read if you don't know these. "Dream as if you'll live forever. Live as if you'll die today." A Blog By Swigz Cotidie damnatur qui semper timet; Aquila non captat muscas. |
||
|
POST REPLY TO THIS THREAD |
Thread Tools | |
|
|