Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
| Latest | 0 Rplys |
|
Show Printable Version | Email this Page | Subscribe to this Thread |
|
Thread Tools |
05-30-2013, 08:42 PM | #1 | |
AF Newbie
Join Date: Aug 2007
Location: Alexandria, Minnesota
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
01 Malibu HVAC fan didn't work on 5
Read through the HVAC thread on the forum and found it very helpful! I changed the resistor but level 5 still didn't work with the new resistor installed... Found out that it was a 30 amp fuse #53 under the hood, the high level blower fuse. Installed a new fuse, put the old resistor back in and the AC blower worked fine! However, one more problem....the new fuse blew a few minutes later...not sure what that is about. I installed a second 30 amp fuse and it has been working for an hour so far. Hope this helps others from all the work, although a person's back gets a good work out, working upside down on the seat and the floor...
|
|
05-31-2013, 07:36 AM | #2 | |
AF Fanatic
Join Date: Jul 2011
Location: Worcester, Massachusetts
Posts: 5,017
Thanks: 70
Thanked 618 Times in 610 Posts
|
Re: 01 Malibu HVAC fan didn't work on 5
Sounds like a blower motor on it's way out....
|
|
05-31-2013, 08:07 AM | #3 | |
AF Newbie
Thread starter
Join Date: Aug 2007
Location: Alexandria, Minnesota
Posts: 9
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 01 Malibu HVAC fan didn't work on 5
Thanks Tech II for the response. Interestingly, I just replaced the blower motor 9 months ago in September so I hope it isn't that issue.
|
|
|
POST REPLY TO THIS THREAD |
|
|