Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys
Go Back   Automotive Forums .com Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Silverado
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 02-06-2008, 08:05 PM   #1
Kitchen363
AF Newbie
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Dumb question about EGR valve 2002 Silverado

I have a 2002 5.3L Silverado. I'm trying to find the egr valve. In the Hanes repair book it show a picture of a V8 model with a egr valve located near the front passenger section of the egine block. Judgeing from the picture, the egr valve looks like a black canister about half the height of a can of red bull. If I look on my truck this does not appear! but there is a bracket there. If anybody ever changed one and could give me some insight as to where its located at that would help me greatly.

Thanks
Kitchen363 is offline   Reply With Quote
Old 02-07-2008, 07:27 AM   #2
xjcamaro89
AF Regular
 
Join Date: Jan 2005
Location: New Wilmington, Pennsylvania
Posts: 231
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Dumb question about EGR valve 2002 Silverado

If i think i know what your talking about you have to take the VORTEC plactic cover off the top of the engine and it will be staring you right in the face toward the front of the engine ontop of the intake, and also under this subject, should the EGR valve be a little loose, there is a screw that holds it down and it is tight, but i can wiggle the EGR back and forth. Just a thought!
xjcamaro89 is offline   Reply With Quote
Old 02-07-2008, 05:57 PM   #3
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Unhappy Re: Dumb question about EGR valve 2002 Silverado

I'll take the Vortec cover off again and do some more looking. I've changed EGR valves on older gm trucks (1995) and some Toyota's. I would guess the part would be very similar looking?? The main reason for changing this is to get the check engine light to go off. I took it to auto zone and got a emissions malfunction code. At first the light would come on for a day or two then go out, for a couple of weeks. But its on now and not going back out. My engine has 135K mile and I have had similar problems like this with other trucks and the egr was the culprit.
Kitchen363 is offline   Reply With Quote
Old 02-07-2008, 06:23 PM   #4
MT-2500
AF - Advisor
 
MT-2500's Avatar
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by Kitchen363
I'll take the Vortec cover off again and do some more looking. I've changed EGR valves on older gm trucks (1995) and some Toyota's. I would guess the part would be very similar looking?? The main reason for changing this is to get the check engine light to go off. I took it to auto zone and got a emissions malfunction code. At first the light would come on for a day or two then go out, for a couple of weeks. But its on now and not going back out. My engine has 135K mile and I have had similar problems like this with other trucks and the egr was the culprit.
It a egr valve problem it will set a egr valve problem code or codes.
What was the code no or no's?
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
MT-2500 is offline   Reply With Quote
Old 02-07-2008, 08:03 PM   #5
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by xjcamaro89
If i think i know what your talking about you have to take the VORTEC plactic cover off the top of the engine and it will be staring you right in the face toward the front of the engine ontop of the intake, and also under this subject, should the EGR valve be a little loose, there is a screw that holds it down and it is tight, but i can wiggle the EGR back and forth. Just a thought!
I checked it out, the part you are refering to this the evap canister purge valve. so the search for the egr is still on going.
Kitchen363 is offline   Reply With Quote
Old 02-07-2008, 08:08 PM   #6
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Red face Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by MT-2500
It a egr valve problem it will set a egr valve problem code or codes.
What was the code no or no's?
MT
I believe the code was P0440? Does that sound right? If the problem doesn't lie within the egr valve what are some other common problem area to look for?
Kitchen363 is offline   Reply With Quote
Old 02-07-2008, 09:51 PM   #7
rjeffery
AF Regular
 
Join Date: Dec 2005
Location: Austin, Texas
Posts: 343
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Dumb question about EGR valve 2002 Silverado

2002's do not have an EGR.
__________________
2002 1500 Ext. Cab 4.8L 2wd.
K&N FIPK, Cat Back Exhaust, Rancho RSX Shocks, Silverstar Headlights High & Low, Infinity Reference Door Speakers & 10" Dual Voice Coil Sub. 265/75/16 BFG AT/KO's, Spray-In Bed Liner, Hella FF75 Fog Lights, Hella FF75 Driving Lights.
rjeffery is offline   Reply With Quote
Old 02-08-2008, 07:28 AM   #8
xjcamaro89
AF Regular
 
Join Date: Jan 2005
Location: New Wilmington, Pennsylvania
Posts: 231
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Dumb question about EGR valve 2002 Silverado

Well anyway, should that evap canister wiggle around or should it be stationary?
xjcamaro89 is offline   Reply With Quote
Old 02-08-2008, 09:10 AM   #9
MT-2500
AF - Advisor
 
MT-2500's Avatar
 
Join Date: Sep 2005
Location: New London, Missouri
Posts: 16,690
Thanks: 5
Thanked 121 Times in 120 Posts
Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by Kitchen363
I believe the code was P0440? Does that sound right? If the problem doesn't lie within the egr valve what are some other common problem area to look for?
Always be sure and write down that code.
I number off can be a couple of hundered dollars off in repair parts.
If that is the right code no.
You have a large leak in the system.
Clear code and check gas cap first.
No fill up with engine running or leaving the cap lose.
3 clicks will do it.
MT
__________________
Remember proper testing gives us the answer to many problems.
MT
MT-2500 is offline   Reply With Quote
Old 02-08-2008, 05:08 PM   #10
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Cool Re: Dumb question about EGR valve 2002 Silverado

[quote=rjeffery]2002's do not have an EGR.[/QUOTE

How come the 2002 don't have egr valve's.
I guess I'll replace the gas cap and get the code cleared. If that does work I'll try the evap purge valve.
Kitchen363 is offline   Reply With Quote
Old 02-08-2008, 05:13 PM   #11
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Lightbulb Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by xjcamaro89
Well anyway, should that evap canister wiggle around or should it be stationary?
Mine wiggles around also. Looks to me that its supposed to be like that. It seems like the o-ring would have a hard time remaining seated.
Kitchen363 is offline   Reply With Quote
Old 02-21-2008, 05:50 PM   #12
Kitchen363
AF Newbie
Thread starter
 
Join Date: Sep 2005
Location: Covington, Kentucky
Posts: 18
Thanks: 0
Thanked 0 Times in 0 Posts
Smile Re: Dumb question about EGR valve 2002 Silverado

Well it turns out my truck has no EGR valve?? Not sure how GM got away with that. However, I went down to Advanced Auto got the code read again. P0440 emissions malf. I replaced the gas cap and after 300 miles the light went out! Sweet!
Kitchen363 is offline   Reply With Quote
Old 02-21-2008, 06:03 PM   #13
j cAT
AF Fanatic
 
Join Date: Oct 2007
Location: EVERETT, Massachusetts
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
Re: Dumb question about EGR valve 2002 Silverado

Quote:
Originally Posted by Kitchen363
Well it turns out my truck has no EGR valve?? Not sure how GM got away with that. However, I went down to Advanced Auto got the code read again. P0440 emissions malf. I replaced the gas cap and after 300 miles the light went out! Sweet!


sometimes the gas cap O ring needs some lubricant I use a small amount of vasoline and this along with occasionial cleaning of the surface in the filler neck should keep this air tight..... if O ring has any cracks you will get this code...
j cAT is offline   Reply With Quote
Old 09-03-2018, 09:51 PM   #14
bephughet
AF Newbie
 
Join Date: Sep 2018
Location: Waynesboro, Virginia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Re: Dumb question about EGR valve 2002 Silverado

This forum just saved me a ton of money!

The check engine light has been on in my 2005 Silverado 1500 HD for about 18 months. Consistant diagnosis is "You need an egr (exhaust gas
recirculation) valve. It'll cost about $750.00 to fix". Last time,
I was told my truck has 2 of those valves and the code now
says they are both bad. So, I was feeling lazy and curious
this morning and decided to check it out. Found out the
following:
1. EGR valves in Silverados require loosening two bolts and
unclipping a wire to remove - something I can do. I even
have the tools.
2. Couldn't find the valve for my truck on any GM Parts
sites on line.
3. Researched where I would find it in my truck. It was not
there. Found this blog that said that some trucks only
have a capped off mount - but no valve.
4. Bingo Not Two -- Not even one. Only a capped mount.
5. Researched how to fix latest code. Solution from this blog: Clean and
lubricate the gas cap gasket and clean the gas input tube.
Grabbed the WD40 and Silicone spray. Cleaned the tube
with WD40 and cleaned and lubricated the gasket with
silicone.
6. Got in the truck, started it, pulled out of the drive and
laughed out loud: NO CHECK ENGINE LIGHT!!!!
7. Looking for another mechanic.
8. BTW In my truck, a blinking light means engine trouble. A
solid light means an emission problem. Check this out on
yours!
bephughet is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Silverado

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:49 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts