 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | AF 350Z | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
04-20-2010, 09:01 PM
|
#1 | |
|
AF Newbie
Join Date: Apr 2010
Location: Nanaimo
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Holley Commander 950 not reading RPM
I have a 950 commander with a MSD ignition, crank trigger, with shielded cable, ecu is seeing 8357 rpm at idle. Occasional proper rpm signal at 5000 rpm for split seconds. Checked all wiring , connections, and grounds, talked to MSD and Holley no one can tell me why. Except a dirty signal. Cranking rpm without engine running seems to be ok.
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
