91 tracker starting problem

[sgeorge]

Originally Posted by glendor

Thanks! I didn't know that the wires went thru the taillight. I will check that out and let you know.
You can email me at glendor2@earthlink.net.

I am busy today, but I will check that out tomorrow.
This thing is really starting to tick me off. BTW, the relays click, and according to the Haynes manual(puke), they test OK.
Do you by chance know the location of the main relay? Is it in the ECM? I have looked and other than some relays under the hood, that I later identified, I can't seem to find it.

Thanks!

i can rebuild them sgeorge@crossroadssip.com $59.95

[jwmoorepoppy]

I AM NEW TO THIS SITE. wHAT FIXED THE GEO THAT WOULD ONLY RUN IF STARTED ON ETHER???

[bigd7315]

here is some answers the ecm causes the fuel problem and the main control for 12 volts goes through the ecm the new ones run from 500 up to 1500 for a auto 2wd and there is 15 differenr motors and computers and it can be a nightmare make sure if you change yours the numbers they're 4 sets the 2 10 digit # match exactly or it will kick the light on and if it is a 95 or older the reset is under the drivers side speaker if it is 96 and newer it is just unhook batt and turn heeadlights on for 10 min and 1 more answer the chip does not have to be changed or reprogramed just make sure the # match any questions email me at bigd7315@yahoo.com